The safety of a car is essential. Whether or not the Audi A1 are financial holes, certain routine service acts are indispensable. In this article we will explain to you when to replace the brake discs of your Audi A1? To do this, first of all, we will discover what the brake discs of your car are used for, then, when to replace the brake discs of your Audi A1, and, finally, how to change them with new ones.
Benefit of the brake discs of a Audi A1
We begin our article by explaining what the brake discs of a Audi A1 are used for, it will enable you to discover why it is important to make certain that they are always in good working order.
Brake discs are the main component of your braking system. Obviously, braking on an Audi A1 is hydraulic, it is a system of hoses and pressurized oil that will come into action when you press your brake pedal. This pressure will actuate a piston that will push the brake pads on your brake disc which is installed on your wheel. When the brake pads will pinch the discs which will trigger your Audi A1 to brake.
When to replace the brake discs of a Audi A1?
We will now proceed to the section that undoubtedly attracts you to this content, namely, when replacing the brake discs of a Audi A1? How we explained it to you just before, the brake discs and pads work in osmosis, nevertheless these two elements are wearing parts and they will, as time passes and especially the friction when braking wears out and loses braking power. We will now highlight the different techniques to know when to change them:
- We consider that generally speaking the brake discs should be changed every 80, 000 – 100, 000 km on a Audi A1 , nevertheless it is important to know that based on your driving style and the type of journey this can vary considerably. In truth, if you principally drive on the motorway and your brakes are just slightly used, this amount can increase, alternatively, if you just drive in built-up areas, it can reduce.
- A simple and effective method to identify the state of the brake discs on your car is during the technical inspection. In truth this thorough control checks the state of your brakes and the controller will tell you if they are in good state or need to be changed.
- A simple visual method to know when to replace the brake discs on your Audi A1 is to remove the wheels after the vehicle has been set on stands. Once removed, you will be able to access your discs and verify their state. If they have any big scratches or deformations you will have to replace them. Otherwise the second indicator to verify is to measure the depth of the disk in relation to its edge, if this value exceeds 1 mm you will have to change them by new ones.
.
How to replace the brake discs on your Audi A1?
Finally, to end this content we will fairly quickly show you how to replace the brake discs of your Audi A1. You must know that if you replace the brake discs of your motor vehicle, you will absolutely have to change the brake pads of your Audi A1, don’t think twice to seek advice from our content which points out you how to make this replace.
As far as changing discs is concerned, here are the main steps to follow:
- Put your Audi A1 on stands, take off the wheels you want to action on.
- Using a large flat screwdriver, pry on your brake pads to compress the caliper piston as much as possible and have enough play to produce all your changes.
- Using large Torx bits, take out the two nuts that lock the upper component of your brake caliper, take out it.
- Take out your brake pads, then unlock your brake discs thanks to the two torx screws on the side of the disc, you may possibly need a mallet to remove the discs.
- Replace the discs and tighten them with the new torx screws provided, replace your pads, reassemble the upper component of the caliper and tighten everything tightly.
- Mounting your wheels, and make sure to do a 500-kilometer brake break-in before braking hard.
If you have any additional questions about the Audi A1, do not hesitate to consult our Audi A1 category.
