Learning to drive a vehicle is not all the time convenient, and sometimes it may seem like a good solution to choose an automatic Volkswagen Crafter 2, if it’s for simple comfort or ease of use, this sort of transmission is becoming more and more wide-spread. However, while they might seem like the best solution, there may possibly as well be complications with the automatic gearboxes of your Volkswagen Crafter 2 . This is exactly the theme of our content. First, we’ll quickly explain the different types of automatic gearboxes, then, in a second step, which complications you may possibly face with the gearbox of your Volkswagen Crafter 2 , and, finally, how to resolve them.

problem-automatic-transmission-volkswagen-crafter-2

The different types of automatic gearbox of a Volkswagen Crafter 2

.
Gearboxes have the benefit of being known to be trustworthy, as you don’t need to use your clutch pedal and everything is electronically and mechanically controlled there will be no early wear of your clutch or other elements that could be put to the test by misuse on your part.
However, based on the sort of automatic transmission your Volkswagen Crafter 2 is equipped with you will have more or less reliability, we will present them to you now:

  • Common automatic gearbox: It will use a torque converter, which will control the gear changes, it’s the oldest technology, it has evolved a lot in the last decades (more gears and a better management of the gear changes).
  • Robotized automatic gearbox: This is a manual gearbox with a robotized mechanism that will replace the driver’s action. This sort of gearbox is less and less common because they are viewed as very slow. We as well quite often feel a coupling during deceleration.
  • Dual-clutch automatic transmission: This is the ultimate automatic transmission, it functions on similar principle as the robotic transmission, but thanks to its dual clutch, you won’t have any more complications with slow speeds or elevated fuel consumption. They are often equipped on luxury models.
  • Continuously variable automatic box: It is similar principle as on a scooter, a variator will come to control the differences between acceleration and motor speed, they are really slow and often be unresponsive during the acceleration phases of your Volkswagen Crafter 2.

.

I’m having complications with the automatic transmission on my Volkswagen Crafter 2

We now begin the part that definitely attracts you the most in this post, what are the complications you may come across with the automatic transmission of your Volkswagen Crafter 2? As mentioned above, generally speaking they are more reliable than manual transmissions, however, here are the most important complications you may face:

  • As mentioned over, no matter what sort of automatic gearbox, they are quite often established to be slow and have inertia when accelerating. However, this phenomenon is supposed to appear just when the car is started, not when it is launched. If it feels like it happens constantly, the clutch or converter is most likely dead.
  • I have the impression that a gear in the automatic transmission of my Volkswagen Crafter 2 no longer shifts or jumps: If you have the impression that your gears no longer shift or often jump on your Volkswagen Crafter 2, there is a part that is undoubtedly responsible for this failure. Obviously, the solenoid that acts as a “switch” to engage the gears must not be working effectively, second option, a speed or engine speed sensor may be faulty and send the wrong information to your gearbox.
  • If you feel drops originating from the automatic gearbox of your Volkswagen Crafter 2: If you feel a clutch when you go up or when you slow down, it is either your oil which is too old and which does not lubricate any more adequately all the mechanisms of your gearbox, or else a sensor which gives bad information

    • .

  • My Volkswagen Crafter 2’s automatic transmission is leaking: At last, if your Volkswagen Crafter 2’s automatic transmission is leaking, it’s most probably one of your spy seals is too worn.

How do I fix automatic transmission complications on a Volkswagen Crafter 2?

And finally, we’re going to try to give you the solutions to correct the automatic transmission complications on your Volkswagen Crafter 2 . Find them below:

  • Oil leak on the automatic gearbox of a Volkswagen Crafter 2: Find the origin of the leak, and replace the concerned gasket, get it achieved by a specialist, opening a gearbox is not easy. It will cost you a few hundred euros, especially for the labour. Do not think twice to read our content on gearbox oil leaks on Volkswagen Crafter 2.
  • Sensor problem: No matter which sensor is involved, a replacement is the just remedy, sensors do not repair themselves, you should count from 100 to a few hundred euros depending on the difficulty of access to the one that concerns you.
  • Couplings: If you have complications with the couplings on your Volkswagen Crafter 2, you will only need to do a complete gearbox change to gain comfort and preserve your gears.
  • The automatic gearbox of my Volkswagen Crafter 2 slips: In this instance, you clearly have a dead clutch disc, you will have to change the clutch, and on some models you won’t have the ability to change it without doing a standard exchange of the gearbox, be prepared to spend more than a thousand euros.

There are other automatic transmission complications on Volkswagen Crafter 2, such as electronic problems or pressure complications, but this list lists the most important ones, no matter the reason, for such difficult mechanisms. Once you feel a problem on this level, we suggest you to go fairly quickly to your mechanic.

In the event that you have any additional questions about the Volkswagen Crafter 2, do not hesitate to consult our Volkswagen Crafter 2 category.