Driving a vehicle is a daily activity for many of us, our tracks are not always safe, and regardless it’s raining, windy or snowing, we frequently have no choice but to take our Renault Megane 3. Not being able to act on traffic conditions, we try to have at minimum a safe vehicle! If you are not secure, if you have the feeling that your Renault Megane 3 is pulling to the left, then you are in the right place. We made the decision to create this content to help you discover the origin of this issue and quickly feel safe behind the wheel of your car. To get this done, we will first look at the triggers of a Renault Megane 3 that pulls to the left without vibration and to finish, a car that pulls to the left with vibration.
Renault Megane 3 that pulls to the left without vibration
Renault Megane 3 pulling to the left because of the alignment
Let’s start with the circumstance of your Renault Megane 3 which pulls to the left without vibration, one of the most typical roots of a non-straight trajectory on a vehicle is the alignment , the truth is, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is mostly carried out when you change your tires. Even though it is complicated or even impossible to know the state of your alignment, you can examine the sidewalls of your tires, if you see abnormal wear on your Renault Megane 3, it is most likely that the alignment is at fault. In cases like this, go to your mechanic or tyre professional to correct it.
Renault Megane 3 pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only explanation for a car that pulls to the left. In truth, if you have a difference in pressure on your tires, it is logical that your Renault Megane 3 is no longer a stable steering. Therefore remember to verify the pressure of all four tyres. Moreover to the risk of an injury if you encounter your Renault Megane 3 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a consequence, you will have to change them more quickly.
My Renault Megane 3 is pulling to the left and I encounter vibrations:
Renault Megane 3 pulling to the left because of the silent blocks
Now let’s look at the case of a Renault Megane 3 that pulls to the left but also triggers vibrations in the steering wheel. The first known cause of trajectory error plus vibration is that your silent blocks are dead. In truth, when they are too worn, they no longer assume their purpose of shock absorber and binder between the different elements of your front drivetrain, which creates a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Renault Megane 3 pulls to the left. Verify their state and change them if needed. In the event that you would like more info on trouble with the silent blocks, please examine our specific content.
My Renault Megane 3 pulls to the left due to the bearings
Another possibility that your Renault Megane 3 pulls to the left is that one of your bearings, usually the front one, is dead, you should, additionally to the trajectory problem, feel a particular vibration or rolling noise. In truth, when bearings are damaged, they no longer rotate as well and slow down the rotation of the wheel on which they are installed, which consequentially creates a trajectory problem. Verify their state and have them swapped out if necessary.
My Renault Megane 3 pulls to the left due to the shock absorbers
Last but not least, your Renault Megane 3 that pulls to the left and produces vibrations due to the shock absorbers. Whether it’s the damper cup, your tired springs, or a twisted cylinder, every problem associated with the shock absorbers can disrupt the normal behaviour of the Renault Megane 3. You should, however, feel a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers checked and ask your mechanic for a replacement if necessary.
To find more tips on the Renault Megane 3, take a look at the Renault Megane 3 category.
