You’re uninterested in listening to cassettes and only being able to enjoy the radio, while your smartphone is full of your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s specifically why we’ve created this article to help you, because now you’re going to learn about how to install a car radio on your Renault Megane 3. To get this done, first of all we will discover how to remove the old car radio, then how to install a car radio on Renault Megane 3 and at last, how to connect it.
How to install car radio on Renault Megane 3: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Renault Megane 3, there is one essential task, take away the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two solutions determined by the stereo that equips your Renault Megane 3:
- Original car radio:
In this case, you’ll have to be patient, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Renault Megane 3. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections.
- Aftermarket radio :
In this situation the method is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Renault Megane 3: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Renault Megane 3. Beforehand, spend some time to examine the suitability of your car and your headunit, and to read the installation information, which may give you specific guidelines.
Here are the various guidelines involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the function of holding your car radio in place on your Renault Megane 3, once installed, be sure you press the locking tabs on each side of the frame. Once this step has been carried out, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Renault Megane 3, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Renault Megane 3, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
Whenever you have any additional questions about the Renault Megane 3, do not hesitate to consult our Renault Megane 3 category.