Driving a car is a daily activity for a lot of people, our paths are not always secure, and regardless it’s raining, windy or snowing, we frequently have no choice but to take our Mazda 6. Not having the capability to act on traffic conditions, we try to have at least a safe vehicle! If you are not relaxed, if you have the feeling that your Mazda 6 is pulling to the right, then you are in the good. All of us made the decision to create this article to help you locate the source of this issue and fairly quickly feel safe behind the wheel of your car. To do this, we will initially look into the triggers of a Mazda 6 that pulls to the right without vibration and finally, a car that pulls to the right with vibration.
Mazda 6 that pulls to the right without vibration
Mazda 6 pulling to the right because of the alignment
Let’s start with the case of your Mazda 6 which pulls to the right without vibration, one of the most common origins of a non-straight trajectory on a vehicle is the alignment , actually, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is generally conducted when you replace your tires. Nevertheless it is tricky or even impossible to know the condition of your alignment, you can check out the sidewalls of your tires, if you detect abnormal wear on your Mazda 6, it is likely that the alignment is to blame. In this case, go to your service garage or tyre expert to correct it.
Mazda 6 pulling to the right because of the tyres
Speaking of tires, parallelism isn’t the only reason for a car that pulls to the right. In truth, if you have a difference in pressure on your tires, it is obvious that your Mazda 6 is no longer a stable steering. So be sure you examine the pressure of all four tyres. Additionally to the risk of an ıncident if you feel your Mazda 6 pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And as a result, you will have to replace them more quickly.
My Mazda 6 is pulling to the right and I feel vibrations:
Mazda 6 pulling to the right because of the silent blocks
Now let’s look at the case of a Mazda 6 that pulls to the right but also triggers vibrations in the steering wheel. The first general cause of trajectory error plus vibration is that your silent blocks are dead. In truth, when they are too worn, they will no longer assume their task of shock absorber and binder between the different parts of your front drivetrain, which can cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Mazda 6 pulls to the right. Verify their condition and replace them if needed. In the event that you really want more information on concerns with the silent blocks, please go through our detailed article.
My Mazda 6 pulls to the right due to the bearings
Another possibility that your Mazda 6 pulls to the right is that one of your bearings, generally the front one, is dead, you should, in addition to the trajectory problem, encounter a notable vibration or rolling noise. In truth, when bearings are damaged, they will no longer rotate as well and slow down the rotation of the wheel on which they are installed, which inevitably can cause a trajectory problem. Verify their condition and have them changed if necessary.
My Mazda 6 pulls to the right due to the shock absorbers
Last but not least, your Mazda 6 that pulls to the right and creates vibrations due to the shock absorbers. It doesn’t matter if it’s the damper cup, your tired springs, or a twisted cylinder, every problem in connection with the shock absorbers can disrupt the normal behaviour of the Mazda 6. You should, even so, feel a noise when you drive over bumps or on speed bumps, for example. Have the condition of your shock absorbers checked and ask your mechanic for a replacement if necessary.
If you wish more guides on the Mazda 6, go to our Mazda 6 category.
