Driving a car is a daily activity for many of us, our roads are not always secure, and regardless whether it’s raining, windy or snowing, we quite often have no choice but to take our Acura RDX. Not being able to act on traffic conditions, we try to have at minimum a safe car! If you are not secure, if you have the feeling that your Acura RDX is pulling to the right, then you are on the good website. Our team decided to write this article content to help you locate the source of this problem and fairly quickly feel safe behind the wheel of your car. To make this happen, we will first look at the causes of a Acura RDX that pulls to the right without vibration and finally, a car that pulls to the right with vibration.
Acura RDX that pulls to the right without vibration
Acura RDX pulling to the right because of the alignment
Let’s begin with the circumstance of your Acura RDX which pulls to the right without vibration, one of the most classic sources of a non-straight trajectory on a car is the alignment , actually, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is normally conducted when you change your tires. Nevertheless it is complicated or even impossible to know the state of your alignment, you can examine the sidewalls of your tires, if you identify abnormal wear on your Acura RDX, it is certain that the alignment is at fault. In this instance, go to your garage area or tyre professional to correct it.
Acura RDX pulling to the right because of the tyres
Speaking of tires, parallelism isn’t the only reason for a car that pulls to the right. In truth, if you have a difference in pressure on your tires, it is rational that your Acura RDX is no longer a stable steering. So remember to examine the pressure of all four tyres. Moreover to the risk of an injury if you feel your Acura RDX pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And therefore, you will have to change them quicker.
My Acura RDX is pulling to the right and I feel vibrations:
Acura RDX pulling to the right because of the silent blocks
Now let’s look at the case of a Acura RDX that pulls to the right but also causes vibrations in the steering wheel. The first general trigger of trajectory error plus vibration is that your silent blocks are dead. In truth, when they are too worn, they not anymore handle their role of shock absorber and binder between the different parts of your front drivetrain, which will cause a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Acura RDX pulls to the right. Check their state and change them if necessary. In the event that you would like more information on trouble with the silent blocks, please go through our particular article content.
My Acura RDX pulls to the right due to the bearings
Another possibility that your Acura RDX pulls to the right is that one of your bearings, in most cases the front one, is dead, you should, furthermore to the trajectory deficiency, undergo a particular vibration or rolling noise. In truth, when bearings are damaged, they no more rotate as well and slow down the rotation of the wheel on which they are installed, which inevitably will cause a trajectory deficiency. Check their state and have them replaced if necessary.
My Acura RDX pulls to the right due to the shock absorbers
Last but not least, your Acura RDX that pulls to the right and generates vibrations due to the shock absorbers. Whether it’s the damper cup, your tired springs, or a twisted cylinder, every deficiency associated with the shock absorbers can disturb the normal behaviour of the Acura RDX. You should, however, experience a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers inspected and ask your auto technician for a replacement if necessary.
If you need more tutorials on the Acura RDX, go to our Acura RDX category.
