Your car’s handbrake is actually a required protection feature based on the highway code, in fact , it aims to quit your Acura RDX, even over a slight slope. It must be in addition to the main brake controls. It will be possible that after a while the wire system of the hand brake will loosen up and you will certainly not pass the technical control or you could feel that it is no longer stopping your car. To deal with these concerns, we will look at how to adjust the hand brake on your Acura RDX . To accomplish this, first we will see the adjustment of your manual handbrake on Acura RDX , in that case, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Acura RDX?
Thus we start our article with the hand brake adjustment of a Acura RDX in its manual version. This kind of version works in a simple way using a system of wire and anchoring screws that allow you to control the tension with the device and so to modify the stroke with the lever of the handbrake. To act on it you will have to act on these screws in order to expand the handbrake cable of the Acura RDX . In any case, before adjusting the hand brake, you must check that your back wheels are not blocked through the adjustment. Please find below the detailed treatment to carry out this intervention:
- At the level of your handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once carried out, you should see a trapdoor on your handbrake, open it to see the screw and wire system.
- You will have to locate the locknuts and loosen them with a wrench tool to allow you to change the cable stress.
- Now screw on the lock nuts about both sides, make sure to make the comparable changes on both sides to keep a balanced brake, and check that the hand brake handle of your Acura RDX has a stroke of about 3 notches.
- Tighten up the locknuts and test out the locking of the rims of your car, if it’s great you can reassemble the set, otherwise tighten up again the tightening anchoring screws until you get a great optimal configuration
.
If you don’t have access to the handbrake flap of the Acura RDX, the adjustment will be precisely the same however it will be done by passing below your car at the level of your handbrake handle. Make sure put your car on the stand before any actions.
How do I adjust the automatic handbrake of my personal Acura RDX?
Second system of handbrake adjustment about Acura RDX , this is an automatic handbrake, contrary to the manual one, this is done on the brake drums or perhaps calipers, and is also imagined to change automatically for the wear of the brake shoes or brake pads. It may be that if you soon have to get brake pads, your handbrake will lose power, listed below are the steps to consider to check if the tension of your handbrake is the appropriate one:
- Remember that an automatic handbrake can’t be modified directly because it is supposed to adapt on its own to the have on of the brake pads or shoes of your Acura RDX.
- You can still check that the system is functioning properly simply by putting the vehicle on the stand and examining by driving under the motor vehicle that the pads are still in good working order.
- For drum brakes it will probably be necessary to take apart the brakes to check your the shoes, all of us recommend you to have it performed by a specialist.
- Make sure to change your brake pads if you need to.
What is the cost of adjusting the handbrake of Acura RDX by a specialist?
Finally, if you do not feel comfortable with this procedure, especially since it questions a security element of your car, namely the adjustment with the handbrake of the Acura RDX , we inform you to go to a mechanic who are able to adjust your handbrake to get a about fifty local currency . When you have problems with vibrations when braking on Acura RDX, do not think twice to consult our article which works with this issue.
To get more tips on the Acura RDX, take a look at the Acura RDX category.
