Keeping an eye on your car is fundamental in these modern times, in truth, if you do not do the minimal routine service of it, or if you do not take into consideration signs of abnormality, you strongly risk to see your motor vehicle becoming unpleasant to use. This is precisely the theme we are going to focus on today, one of the indications that most interferes with car owners is the key indicator light on Volkswagen Crafter 2 dash . To try to help you analyze this light, first we will see what this key light on Volkswagen Crafter 2 means, then in a second how to proceed if the key light is lit on Volkswagen Crafter 2? .
What does the key light on Volkswagen Crafter 2 indicate?
So we start our content page with the meaning of a key indicator light on Volkswagen Crafter 2 dash , it may be that in addition to the key you have the logo of a car next to it. Take note that the most important function of this light is to inform you that it’s time to service your Volkswagen Crafter 2 , nevertheless, this light can also have other explanations, even dozens of them. To discover the source of this issue the best remedy will be to run your Volkswagen Crafter 2 through the diagnostic too l, if you don’t know how to achieve this process, you can find all the necessary information to accomplish this act in our dedicated content page. We will try in the following list to give you the maximum information on the most important warning messages it can send you:
- An oil change done without resetting the indicator: If you have done your oil change by yourself, it is very likely that you have not thought of resetting the oil change indicator of your Volkswagen Crafter 2, here is the process to achieve this small reset of the key light of your car.
- Oil level issue: It is possible that the oil level sensor is revealing that the oil level is too low.
- EGR Valve: Another possibility is that the key light on your Volkswagen Crafter 2 is on because your EGR valve is dirty, very often the case if you are driving short distances or not pushing the gears of your vehicle.
- Glow plugs: Finally, the last and most common cause of an orange wrench light on Volkswagen Crafter 2 is that your glow plugs are getting tired.
What if the orange key light on Volkswagen Crafter 2 is on?
We are now going to move on to the second part of our content page and try to present you the solutions to each of the problems outlined in the previous part and therefore how to proceed if I find out the wrench light on your Volkswagen Crafter 2? To do this, we will take turns answering each of the problems you may face:
- Reset the drain indicator light: As we revealed before, a basic reset of the indicator light on your Volkswagen Crafter 2 will be enough to turn off the key indicator and restart it for a cycle of 10 000km or 1 year, see our content page to accomplish this operation.
- Oil level issue: This is a very basic issue and the easiest to solve. You will just have to check your oil level, we recommend you to take the opportunity to verify all your oil levels.
- EGR Valve: In the circumstance of a light that comes on as a result of the EGR valve, you will need to have the points of this fault code through the diagnostic tool. Once you are sure of the source of the issue, you can try to clean your car by pushing the gears (hot engine), in any other case disassemble and clean the EGR valve of your Volkswagen Crafter 2, we done a guide to help you to do it. Otherwise, go to a garage and prepare to pay a few hundred euros.
- Glow plugs: Finally, if your issue comes from your glow plugs, the process to change them is quite basic and you won’t need more than 40 euros worth of glow plugs.
There, you now know everything about the wrench light on Volkswagen Crafter 2 , we hope this content page has helped you solve your issue.
To find more tips on the Volkswagen Crafter 2, take a look at the Volkswagen Crafter 2 category.
