If you feel you can’t see as well at night, or you feel you’re lighting too low, or too high, in all these cases, there’s only one part of your vehicle responsible – your headlights, also known as high beams. Although this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this elementary manipulation, and in this article, we are going to see how to adjust the headlights of your Volkswagen Crafter 2? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Volkswagen Crafter 2.
Why adjust the headlights of your Volkswagen Crafter 2?
So let’s begin our article with the interest of adjusting the headlights of your Volkswagen Crafter 2. For most people, our headlights are adjusted sufficiently, and they seem to light up enough after dark. Sadly this is not always the case and examining this setting, either because the headlights on your Volkswagen Crafter 2 are not bright enough, or because you have the feeling that they are too weak is a great idea .
Adjusting the high beams of your Volkswagen Crafter 2 for safety
First of all, the headlight adjustment of a Volkswagen Crafter 2 must be done for a very easy security reason. If it’s for you, or for the other users you come across during your night trips. In truth, if you don’t see enough, the risk is to miss out an obstacle while traveling, or to anticipate a curve badly. On the other hand, if your headlights are too strong, regardless if you are meant to switch to low beam lights when you pass a vehicle, the time required to make this change will most of the time expose the driver in front of you to the headlight beam of your Volkswagen Crafter 2 . It is consequently essential for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Volkswagen Crafter 2 for legal reasons
In addition to security, there is a law that regulates the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be equivalent to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volkswagen Crafter 2?
We will now proceed to the part that interests you the most in this article, how to adjust the headlights of his Volkswagen Crafter 2? This setting may appear a bit complicated, but by following the instructions you should be able to perform it without too much concern.
Preparations to adjust the headlights of a Volkswagen Crafter 2
First of all, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to set up:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure attentively.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volkswagen Crafter 2
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Verify with a level that both parts of the cross are horizontal. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your hood, identify the screws for horizontal and vertical modification of the headlights of your Volkswagen Crafter 2 (they are in most cases marked, and those on top must modify the verticality and the one on the side handles the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line noted on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Volkswagen Crafter 2 is logical, do not hesitate to verify it after you have driven it, occasionally it may move.
.
.
If you want to adjust the fog lights on your Volkswagen Crafter 2, please browse our article on this subject.
If you wish more tutorials on the Volkswagen Crafter 2, go to our Volkswagen Crafter 2 category.
