Having a issue with your car is basic, because unfortunately recent automobiles are more and more complex and therefore at the mercy of more and more possible breakdowns. In this article we’re going to try to help you to solve an injection problem on your Peugeot 306 . This is a issue that is specially bothersome because it can eventually bring your vehicle to non starting or broken engine unit. To get this done, first we will discover how injection works, then, what are the different concerns that can exist on a Peugeot 306 injectors , and at last, how to solve them.
What is the purpose of the injection of a Peugeot 306?
So we begin our article by promptly detailing how an injection system works so that you have all the information you need to understand the failures connected with it. < br>
The injection system of a Peugeot 306 handles the fuel intake into the engine unit , it replaces the old carburettors. It has the benefit to be a lot more precise and to come, under pressure, to release the fuel in the engine unit. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will relieve the fuel in the form of micro-drops into the cylinders of your Peugeot 306. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to enable a better air/fuel mixture and therefore a better combustion.
What are the different injection complications on Peugeot 306?
Now in this second part, we are going to explore the different injection complications and their manifestations that you may possibly encounter on your Peugeot 306 .
Injection pump complications Peugeot 306
To commence, we will discover the injection pump complications on your Peugeot 306, there are not many of them, they are quite often persistent but we will outline them below:
- Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system might be too high or too low which will cause a bad air/fuel mixture and therefore a bad combustion and thus alter the performance of the engine unit of your Peugeot 306.
- Leakage from the injection pump of your Peugeot 306: If you have a major leakage problem, the consequence will be much the same as if you have a lack of pressure, you will not have enough pressure and therefore the combustion of your fuel will not be good
.
Regarding the outcomes and manifestations of a fuel pump issue on a Peugeot 306 , you will certainly experience, a lack of power, your engine unit grazing, dark smoke emissions…
Injectors complications Peugeot 306
Now we move on to the injector problems on Peugeot 306 . Injectors represent the end of your injection system, here are the different complications you may possibly encounter:
- Dirty Peugeot 306 injectors: This can happen because of poor fuel quality, they will let less fuel through or more if they are totally clogged. So you will possibly have one or more cylinders that are not functioning effectively.
- Leaky Peugeot 306 injector: It’s quite often at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
- Injector Peugeot 306 HS: This is the circumstance when your injectors are totally clogged or when you have an electronic problem, it will not let anything go.
Regarding the signs of illness of injector complications on your Peugeot 306 it is about the same as for a defective injection pump. You may possibly encounter problems with starting, throttle response, power loss, and smoke emission.
How to get rid of an injection issue on a Peugeot 306?
To finish our content page on the injection complications on Peugeot 306 , we will try to give you the solutions that exist to solve these complications.
If after a precise analysis it’s your injection pump that is the main cause of your complications, it will unfortunately be very complicated to intervene on the trouble without changing the part, this change quite often goes with the replacement of the injectors, and occasionally the tank, it will take between 2000 and 3000 euros for the whole, try to get some diagnostics and estimates before starting any repair.
Regarding a issue with an injector there are various solutions depending on your concerns, here they are:
- Dirty injector: You can clean the injectors of your Peugeot 306, do not be reluctant to seek advice from our article on this subject to get the procedure. If it doesn’t work, you will have to replace them.
- Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to replace it, do not think twice to seek advice from our article on the injectors that leak on Peugeot 306, to have all the solutions available to you.
- Injector HS: Finally, last remedy, your injector is damaged or doesn’t work anymore, generally, the replacement of an injector costs around 500 euros labor included.
To get more tips on the Peugeot 306, take a look at the Peugeot 306 category.
