Having a issue with your car is common, because regrettably recent vehicles are more and more complex and consequently at the mercy of more and more possible breakdowns. Today we’re going to try to help you to fix an injection problem on your Peugeot 1007 . This is a issue that is particularly frustrating because it can eventually bring your vehicle to non starting or damaged engine. To get this done, first we will find out how injection functions, then, what are the different concerns that can exist on a Peugeot 1007 injectors , and at last, how to fix them.

injection-problem-peugeot-1007

What is the intent of the injection of a Peugeot 1007?

So we start our article by promptly detailing how an injection system functions so that you have all the information you need to discover the failures affiliated with it. < br>
The injection system of a Peugeot 1007 handles the fuel intake into the engine , it replaces the old carburettors. It has the benefit to be far more precise and to come, under pressure, to discharge the fuel in the engine. The injection pump takes care of pressurizing the fuel and transferring it to the injectors, and the injectors will discharge the fuel in the form of micro-drops into the cylinders of your Peugeot 1007. The benefit of fuel injection is to have a much more precise dosage than a carburettor and to allow a better air/fuel mixture and consequently a better combustion.

What are the different injection complications on Peugeot 1007?

Now in this second component, we are going to see the different injection complications and their signs of illness that you might confront on your Peugeot 1007 .

Injection pump complications Peugeot 1007

To commence, we will find out the injection pump complications on your Peugeot 1007, there are not many of them, they are generally persistent but we will outline them below:

  • Electronic issue of the high pressure pump: If you have an electronic issue, the pressure in your injection system might be too high or too low which will cause a bad air/fuel mixture and consequently a bad combustion and thus alter the behavior of the engine of your Peugeot 1007.
  • Leakage from the injection pump of your Peugeot 1007: If you have a significant leakage problem, the result will be much the same as if you have a lack of pressure, you will not have enough pressure and consequently the combustion of your fuel will not be good

.
Concerning the results and signs of illness of a fuel pump issue on a Peugeot 1007 , you will certainly feel, a lack of power, your engine grazing, dark smoke emissions…

Injectors complications Peugeot 1007

Now we proceed to the injector problems on Peugeot 1007 . Injectors are the end of your injection system, here are the different complications you might encounter:

  • Dirty Peugeot 1007 injectors: This can happen due to poor fuel quality, they will let less fuel through or more if they are completely clogged. So you will possibly have one or more cylinders that are not working properly.
  • Leaky Peugeot 1007 injector: It’s generally at the high pressure seals that an injector can leak, it can also, more rarely, be cracked or broken.
  • Injector Peugeot 1007 HS: This is the case when your injectors are completely clogged or when you have an electronic problem, it will not let anything go.

Concerning the symptoms of injector complications on your Peugeot 1007 it is about the same as for a defective injection pump. You might encounter problems with starting, throttle response, power loss, and smoke emission.

How to fix an injection issue on a Peugeot 1007?

To end our article on the injection complications on Peugeot 1007 , we will try to give you the solutions that exist to fix these complications.
If after a precise diagnosis it’s your injection pump that is the source of your complications, it will regrettably be very difficult to intervene on the problem without changing the component, this change generally goes with the replacement of the injectors, and sometimes the tank, it will take between 2000 and 3000 euros for the whole, try to get several diagnostics and estimates before starting any repair.
Concerning a issue with an injector there are various solutions based on your concerns, here they are:

  • Dirty injector: You can clean the injectors of your Peugeot 1007, do not hesitate to seek advice from our article on this subject to get the procedure. If it doesn’t work, you will have to replace them.
  • Leaky injector: The replace and the purchase of a joint kit will only cost you a few tens of euros, but you still need to be able to replace it, do not hesitate to seek advice from our article on the injectors that leak on Peugeot 1007, to have all the solutions available to you.
  • Injector HS: Finally, last remedy, your injector is damaged or doesn’t work anymore, in general, the replacement of an injector costs around 500 euros labor included.

If you wish more tutorials on the Peugeot 1007, go to our Peugeot 1007 category.