If you’re a bit of a handy person, you’re most certainly keen to take care of the majority of the work to be completed on your Peugeot 205, but some are more difficult than others and necessitate the removal of body parts or elements to access the component you want to operate on. We want to help you in this operation. That’s why in this article we are going to discover how to remove the bumper from a Peugeot 205. This action is not very difficult and you should have the ability to do it with few tools. To accomplish this, first we will discover how to remove the front bumper of your Peugeot 205, then how to remove the rear bumper of this one.
How to remove the front bumper from a Peugeot 205
So let’s start our article with the front bumper of your Peugeot 205. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to stick to to be able to disassemble the bumper of your Peugeot 205 in good conditions:
- If you want to be more comfortable, we encourage you to lift your Peugeot 205 and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take out the wheel arches: They’re also called fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Peugeot 205. Dependant on your motor vehicle features and the year of your model, you will also have the ability to find staples, to accomplish this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that locks the front bumper of your Peugeot 205 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go underneath your Peugeot 205 to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot 205, to reassemble it stick to the steps in the opposite way.
How to remove the rear bumper from a Peugeot 205
And to conclude, even if the operation is quite similar, we will check out the case of removing the rear bumper from your Peugeot 205. For each stage to avoid repeating ourselves we will simply give you the broad highlights, read the part 1 if you have any uncertainties or questions for more details.
- Start with undertaking the same first stage, that is, lift your Peugeot 205 and remove your rear wheels to be able to have an ideal working area to remove the bumper of your Peugeot 205 without trouble
- Remove the rear wheel arches of your Peugeot 205 to access the side bumper side brackets
- Open your trunk
- Take out the side brackets in your wheel arches to make it less complicated to remove the bumper from your Peugeot 205.
- Take away the lower bindings underneath your Peugeot 205.
- While doing so, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Peugeot 205, stick to the same technique as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Peugeot 205 whether it is the front one or the rear one the approaches are practically the same and it is enough to be meticulous to make everything go well.
To discover more tips on the Peugeot 205, take a look at the Peugeot 205 category.
