If you’re a bit of a do-it-yourselfer, you’re likely eager to manage the vast majority of the maintenance to be completed on your Mercedes Benz GLE Class, but some are more complicated than others and require the removal of body parts or components to access the part you want to focus on. We really want to help you in this operation. That’s why in this article we are going to find out how to remove the bumper from a Mercedes Benz GLE Class. This action is not very complicated and you should have the ability to do it with few equipment. For that, first we will see how to remove the front bumper of your Mercedes Benz GLE Class, then how to remove the rear bumper of this one.

remove-bumper-mercedes-benz-gle-class

How to remove the front bumper from a Mercedes Benz GLE Class

So let’s start our content page with the front bumper of your Mercedes Benz GLE Class. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to stick to in order to disassemble the bumper of your Mercedes Benz GLE Class in good conditions:

  • If you want to be more comfy, we encourage you to lift your Mercedes Benz GLE Class and to remove the front wheels to have a good access to the whole front bumper.
  • Open the bonnet of your motor vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
  • Remove the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Mercedes Benz GLE Class. Depending on your vehicle features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is behind your mudguard and that locks the front bumper of your Mercedes Benz GLE Class on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go below your Mercedes Benz GLE Class to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
  • Make sure to unplug the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Mercedes Benz GLE Class, to reassemble it stick to the steps in the opposite direction.

How to remove the rear bumper from a Mercedes Benz GLE Class

And now, even if the process is quite equivalent, we will check out the case of removing the rear bumper from your Mercedes Benz GLE Class. For each step to avoid repeating ourselves we will simply give you the broad outlines, read the part 1 if you have any uncertainties or questions for more information.

  • Start with executing the same first step, that is, lift your Mercedes Benz GLE Class and remove your rear wheels in order to have an optimal working space to remove the bumper of your Mercedes Benz GLE Class serenely
  • Remove the rear wheel arches of your Mercedes Benz GLE Class to access the side bumper side brackets
  • Open your trunk
  • Remove the side brackets in your wheel arches to make it much easier to remove the bumper from your Mercedes Benz GLE Class.
  • Remove the lower bindings below your Mercedes Benz GLE Class.
  • At the same time, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Mercedes Benz GLE Class, stick to the same technique as for the front bumper

Here, you have learned through these two parts, how to remove the bumper from a Mercedes Benz GLE Class whether it is the front one or the rear one the solutions are practically the same and it is enough to be careful to make everything go well.

If you need more guides on the Mercedes Benz GLE Class, go to our Mercedes Benz GLE Class category.