If you’re a bit of a do-it-yourselfer, you’re most certainly eager to look after most of the work to be carried out on your Chrysler Pacifica, but some are more complicated than others and need the removal of body parts or elements to access the part you want to focus on. We really want to help you in this process. That’s why today we are going to discover how to remove the bumper from a Chrysler Pacifica. This task is not very complicated and you should have the ability to do it with few tools. For that, first we will discover how to remove the front bumper of your Chrysler Pacifica, then how to remove the rear bumper of this one.

remove-bumper-chrysler-pacifica

How to remove the front bumper from a Chrysler Pacifica

So let’s commence our content with the front bumper of your Chrysler Pacifica. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to adhere to to be able to disassemble the bumper of your Chrysler Pacifica in good conditions:

  • If you want to be more relaxed, we recommend you to lift your Chrysler Pacifica and to remove the front wheels to have a best access to the whole front bumper.
  • Open the bonnet of your car: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
  • Take away the wheel arches: They’re also named fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Chrysler Pacifica. According to your motor vehicle features and the year of your model, you will also have the ability to find staples, to accomplish this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is at the rear of your mudguard and that locks the front bumper of your Chrysler Pacifica on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
  • Now it’s time to go below your Chrysler Pacifica to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
  • Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of using a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Chrysler Pacifica, to reassemble it adhere to the steps in the opposite direction.

How to remove the rear bumper from a Chrysler Pacifica

And to conclude, regardless if the operation is quite identical, we will take a look at the case of removing the rear bumper from your Chrysler Pacifica. For each stage to avoid repeating ourselves we will just give you the broad highlights, read the part 1 if you have any uncertainties or questions for more info.

  • Start with performing the same first stage, that is, lift your Chrysler Pacifica and take off your rear wheels to be able to have an optimal working area to remove the bumper of your Chrysler Pacifica serenely
  • Remove the rear wheel arches of your Chrysler Pacifica to access the side bumper side brackets
  • Open your trunk
  • Take away the side brackets in your wheel arches to make it more convenient to remove the bumper from your Chrysler Pacifica.
  • Remove the lower bindings underneath your Chrysler Pacifica.
  • Simultaneously, make sure to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Chrysler Pacifica, adhere to the same operation as for the front bumper

Here, you have seen through these two parts, how to remove the bumper from a Chrysler Pacifica whether it is the front one or the rear one the techniques are just about the same and it is enough to be careful to make everything go well.

If perhaps you have any further questions about the Chrysler Pacifica, do not hesitate to consult our Chrysler Pacifica category.