If you’re a bit of a do-it-yourselfer, you’re most likely wanting to look after the vast majority of the work to be completed on your Land Rover Range Rover Sport, but some are more complicated than others and necessitate the removal of body parts or elements to access the part you want to operate on. We want to help you in this task. That’s why today we are going to discover how to remove the bumper from a Land Rover Range Rover Sport. This process is not very complicated and you should be able to do it with few tools. For that, first we will discover how to remove the front bumper of your Land Rover Range Rover Sport, then how to remove the rear bumper of this one.
How to remove the front bumper from a Land Rover Range Rover Sport
So let’s commence our content with the front bumper of your Land Rover Range Rover Sport. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to follow to be able to disassemble the bumper of your Land Rover Range Rover Sport in good conditions:
- If you want to be more comfortable, we suggest you to put your Land Rover Range Rover Sport on stands and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Remove the wheel arches: They’re also identified as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Land Rover Range Rover Sport. Depending on your car features and the year of your model, you will also have the ability to find staples, to get this done, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that locks the front bumper of your Land Rover Range Rover Sport on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Land Rover Range Rover Sport to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Be sure you disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Land Rover Range Rover Sport, to put it back in place follow the steps in the opposite direction.
How to remove the rear bumper from a Land Rover Range Rover Sport
And to finish, even if the procedure is quite similar, we will look at the case of removing the rear bumper from your Land Rover Range Rover Sport. For each stage to avoid repeating ourselves we will only give you the broad outlines, read the part 1 if you have any doubts or questions for more info.
- Start by performing the same first stage, that is, lift your Land Rover Range Rover Sport and take out your rear wheels to be able to have an optimal working area to remove the bumper of your Land Rover Range Rover Sport without trouble
- Remove the rear wheel arches of your Land Rover Range Rover Sport to access the side bumper side brackets
- Open your trunk
- Remove the side brackets in your wheel arches to make it easier to remove the bumper from your Land Rover Range Rover Sport.
- Take off the lower bindings below your Land Rover Range Rover Sport.
- At the same time, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Land Rover Range Rover Sport, follow the same technique as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Land Rover Range Rover Sport whether it is the front one or the rear one the approaches are pretty much the same and it is enough to be meticulous to make everything go well.
To discover more tips on the Land Rover Range Rover Sport, take a look at the Land Rover Range Rover Sport category.
