If you’re a bit of a handy person, you’re probably eager to manage almost all of the work to be achieved on your Land Rover Discovery, but some are more complex than others and need the removal of body parts or parts to access the part you want to operate on. We really want to help you in this process. That’s why in this article we are going to see how to remove the bumper from a Land Rover Discovery. This process is not very complex and you should be able to do it with few equipment. To do so , first we will discover how to remove the front bumper of your Land Rover Discovery, then how to remove the rear bumper of this one.

remove-bumper-land-rover-discovery

How to remove the front bumper from a Land Rover Discovery

So let’s start our content page with the front bumper of your Land Rover Discovery. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to follow in order to disassemble the bumper of your Land Rover Discovery in good conditions:

  • If you want to be more comfortable, we suggest you to lift your Land Rover Discovery and to remove the front wheels to have a perfect access to the whole front bumper.
  • Open the bonnet of your motor vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
  • Remove the wheel arches: They’re also named fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Land Rover Discovery. According to your vehicle features and the year of your model, you will also have the ability to find staples, to get this done, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is from behind your mudguard and that seals the front bumper of your Land Rover Discovery on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
  • Now it’s time to go underneath your Land Rover Discovery to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
  • Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you perhaps forgot a screw or a clip. Think of using a carpet or other to avoid that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Land Rover Discovery, to put it back in place follow the steps in the opposite way.

How to remove the rear bumper from a Land Rover Discovery

And to finish, regardless if the operation is quite equivalent, we will check out the case of removing the rear bumper from your Land Rover Discovery. For each stage to avoid repeating ourselves we will exclusively give you the broad highlights, refer to part 1 if you have any concerns or questions for more details.

  • Start with carrying out the same first stage, that is, lift your Land Rover Discovery and take out your rear wheels in order to have an optimal working area to remove the bumper of your Land Rover Discovery without trouble
  • Remove the rear wheel arches of your Land Rover Discovery to access the side bumper side brackets
  • Open your trunk
  • Remove the side brackets in your wheel arches to make it less difficult to remove the bumper from your Land Rover Discovery.
  • Take out the lower bindings below your Land Rover Discovery.
  • At the same time, make sure to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Land Rover Discovery, follow the same operation as for the front bumper

Here, you have discoverd through these two parts, how to remove the bumper from a Land Rover Discovery whether it is the front one or the rear one the solutions are almost the same and it is enough to be careful to make everything go well.

If you have any further questions about the Land Rover Discovery, do not hesitate to consult our Land Rover Discovery category.