If you want to have a clean car or you intend to sell your motor vehicle, cleaning the engine of your Land Rover Discovery is an work of maintenance that is not necessarily well operated, between the fear of injuring electronic elements or not knowing which products to use… On this page, we will go along with you to perform this work of service with serenity. For this, first, we will find out why it may be important to clean the engine unit of your car, and, in a second step, how to clean the engine unit of your Land Rover Discovery .
Why clean the engine of your Land Rover Discovery?
So we start our article by telling you why it may be good to consider a cleaning of the engine unit block of your Land Rover Discovery .
The most common justification for cleaning the engine unit compartment of your motor vehicle should be regular maintenance. Failing to clean your motor vehicle will trigger dirt and grime to accumulate and ultimately harm auto parts of your motor vehicle. We recommend you to perform this cleaning between 1 and 2 times a year. It can as well be interesting to clean your engine before selling your Land Rover Discovery, however be careful not to clean it too much, potential buyers might think that a too clean engine is associated with a leaking engine that tries to be hidden by a complete cleaning, better to have a healthy engine unit than a too clean engine.
How to clean the engine unit of your Land Rover Discovery?
We will now begin the heart of the article with the practical part of cleaning the engine unit block of your Land Rover Discovery . To do this, in the first part we will focus on the preparation to do on your engine unit to conduct this work properly, and in a second time, the instructions to enable you to clean the engine compartment of your Land Rover Discovery.
To prepare the engine of your Land Rover Discovery before cleaning it
.
First step and not the least essential one. Even if your car’s engine compartment is designed to be waterproof, cleaning it thoroughly is not recommended either as a result of the many electrical elements inside. Therefore, before you clean the engine of your Land Rover Discovery totally, it is better to protect the electrical elements of your Land Rover Discovery . Here are the steps to take to protect your car’s engine unit correctly:
- Disconnect and remove the battery from your Land Rover Discovery , to do so, do not think twice to consult our article dedicated to this subject if you don’t know how to do this step.
- Take out the upper motor housing of your Land Rover Discovery , it’s a plastic cover that can generally be removed by unscrewing a few screws. This will enable you to have an much easier access to the whole engine unit of your motor vehicle.
- Protect all electrical elements with plastic film , stretchable for example, this includes the flowmeter (which is located on your air inlet), the alternator, all electrical cables and the fuse box
.
Cleaning of the engine unit compartment of a Land Rover Discovery
Now that you have prepared your motor vehicle for cleaning, all you have to do is commence cleaning it, here are the steps to stick to to clean the engine unit of your Land Rover Discovery correctly :
- Warm up the engine unit of your motor vehicle for about 5 minutes, this will produce the grease more fluid and assist in its elimination.
- Use a strong> engine unit degreaser and spray generously on all visible parts of your Land Rover Discovery engine unit.
- Let it work for five to ten minutes.
- Do not use a high-pressure cleaner, as this may harm components of your engine unit. So use a garden hose and rise with a lot of water.
- If you are satisfied with the end result, you can dry your engine unit with a compressor, if there are traces of grease remaining, you can repeat the process until it goes away.
- Last little piece of suggestions, if you want and have the budget, you can apply a layer of motor protection, this will prevent the accumulation of dirt on the engine unit of your Land Rover Discovery, you will discover this sort of product in specialised stores or in the category of products for boat motors
.
All you have to do is clean the work area, refit your engine crankcase, reconnect your battery and you’ll be able to get back on the road with a clean engine unit.
If you want more tutorials on the Land Rover Discovery, go to our Land Rover Discovery category.
