When your car is running normally everything is fine, nevertheless if it begins to have frequent problems you might start to question, specifically if your motor vehicle won’t start. In this post we will show you where the starter of a Land Rover Discovery is, it will help you to fix your ignition problems. To get this done, we will first summarize the purpose of a starter, then, where is the starter on a Land Rover Discovery , and, finally, how to replace the starter of a motor vehicle.

find-starter-land-rover-discovery

Purpose of the starter on your Land Rover Discovery

We start this article by explaining the purpose of the starter motor on your Land Rover Discovery. The starter is an electric motor which is powered by your battery, its role will be to make your engine run at a high enough speed to start it (usually around 300/400 rpm). It is made up of three main parts:

  • The Solenoid: This component is an electrical relay that will action as a switch, it will be activated by the key of your Land Rover Discovery and let the current from your battery to the engine unit of your alternator.

    • The engine unit: Most important component of your alternator, it is the one that will drive the flywheel of your Land Rover Discovery and generate enough speed for your engine unit to start.

  • The engagement pinion: This is the last component of your starter, it is the toothed wheel that will be in direct contact with the flywheel, it enables to send the force from the starter to the engine.

Where is the starter on a Land Rover Discovery?

Now that we have quickly detailed what a starter is and how it functions, we will answer the question that most of you have to ask yourselves where is the starter based on a Land Rover Discovery? It is quite easy to discover a starter, in fact, it is a large component that will almost always be placed in a similar place. We let you see the two possible spots for your motor vehicle starter down below.

Location of the starter on classic Land Rover Discovery

First and most common case, where to discover the starter of a Land Rover Discovery with a conventional motor (implied without start and stop). The starter has a particular function, to start the engine unit of your motor vehicle, for that, it must always be near the engine unit flywheel of this one because it is the component that it actuates when it is used. The flywheel is based at the junction between your gearbox and your engine unit.

Location of the starter to Land Rover Discovery with start and stop

And now second possible starter location of your Land Rover Discovery . This case is much less frequent. It just relates to engines equipped with start and stop, and a good component of them will be equipped with a starter placed close to the flywheel. However, on some particular series or engines, the starter of your Land Rover Discovery might be integrated in your alternator, it is then called a starter-alternator, to discover it nothing much easier, identify your accessory belt and you should see the big starter block.

How to replace the starter on a Land Rover Discovery?

Finally, we’ll describe to you actually quite quickly how to replace the starter of a Land Rover Discovery. This procedure is not actually difficult, it can be considered by people who have a minimal of basic mechanical expertise and adapted tools. Stick to down below the main steps to perform this intervention:

  • Disconnect the battery on your Land Rover Discovery, if you don’t know how to do it, don’t think twice to seek advice from our article which points out how to do it without taking any risk.
  • After discovering your starter, loosen the fasteners that hold it in your engine unit block, there will in most cases be 2 or 3

    • .

  • It will be time to disconnect the power cables from the starter motor of your Land Rover Discovery, nevertheless before doing so we recommend you to take a picture of the set up to avoid making a mistake when reassembling.
  • It’s possible that to remove it you might need to remove parts like the gimbal.
  • Remount the new starter, being careful when connecting the connectors.
  • Reconnect your battery and test your starter.

Whenever you have any further questions about the Land Rover Discovery, do not hesitate to consult our Land Rover Discovery category.