If you’re a bit of a handy person, you’re almost certainly keen to take care of almost all of the service to be completed on your Kia Rio, but some are more complex than others and need the removal of body parts or parts to access the part you want to focus on. We want to help you in this operation. That’s why on this web page we are going to discover how to remove the bumper from a Kia Rio. This process is not very complex and you should have the ability to do it with few tools. To do so , first we will discover how to remove the front bumper of your Kia Rio, then how to remove the rear bumper of this one.
How to remove the front bumper from a Kia Rio
So let’s commence our article with the front bumper of your Kia Rio. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to adhere to in order to disassemble the bumper of your Kia Rio in good conditions:
- If you want to be more comfy, we suggest you to lift your Kia Rio and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your car: Seems obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also described as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Kia Rio. Dependant on your vehicle features and the year of your model, you will also be able to find staples, to achieve this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that seals the front bumper of your Kia Rio on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go beneath your Kia Rio to unscrew the bolts that are on the chassis of the vehicle, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Kia Rio, to reassemble it adhere to the steps in the opposite way.
How to remove the rear bumper from a Kia Rio
And now, regardless if the operation is quite identical, we will take a look at the case of removing the rear bumper from your Kia Rio. For each step to avoid repeating ourselves we will just give you the broad highlights, read the part 1 if you have any uncertainties or questions for more info.
- Start by executing the same first step, that is, lift your Kia Rio and take out your rear wheels in order to have an ideal working area to remove the bumper of your Kia Rio serenely
- Remove the rear wheel arches of your Kia Rio to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it more convenient to remove the bumper from your Kia Rio.
- Remove the lower bindings underneath your Kia Rio.
- At the same time, remember to un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Kia Rio, adhere to the same technique as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Kia Rio whether it is the front one or the rear one the approaches are practically the same and it is enough to be careful to make everything go well.
In the event that you have any additional questions about the Kia Rio, do not hesitate to consult our Kia Rio category.
