Today we’re going to discuss one more subject in the series on car care. This is the coolant level, and more specifically where to put coolant in Kia Rio? To do this, we will commence this guideline with a little reminder on the interest of making sure of the coolant level of your car, then, where to fill coolant in Kia Rio? And, finally, how to make the level of this famous liquid.

put-coolant-kia-rio

Why to fill coolant level on a Kia Rio?

Before we show you where the coolant is on a Kia Rio, we commence our article by reminding you what is the interest of ensuring an ideal coolant level ? The coolant of a Kia Rio has an important objective in the good functioning of your engine unit, the truth is, it will circulate in it to catch the heat made by its process and transfer it to your radiator which has the mission to produce it go down in temperature . It is all the more useful when outside temperatures are high or when you are driving at limited speed and natural cooling by outside air is not useful. Without coolant your engine unit would overheat after only a few minutes, and this would result in engine unit failure, hence the importance of having an ideal coolant level at all times. If your coolant level drops down below the minimum level, the circulation of the coolant in the cooling system may be reduced and therefore its effectiveness may be limited or even zero if it is too low. At last, if it is too high, the pressure can be too high and bring about a leak that can also bring about the engine unit to break down.

Where to put the coolant in Kia Rio?

We now move on to the step that you are likely most keen on, where to put coolant in Kia Rio? You are now informed of the importance of constantly having the ideal level of this coolant. To locate it is very simple, here are the different steps to allow you to find the expansion tank that contains the coolant of your Kia Rio:

  • Before doing anything, wait a few minutes or so for your engine to warm up so that you don’t get burned when you do the coolant level.
  • Pop the hood of your car.
  • You must quickly locate the expansion tank that contains the coolant of your Kia Rio, it is usually located in one of the 4 corners of your engine block, to locate it you just have to look for a plastic container with a black or yellow plastic cap with a danger logo or thermometer on the top.

How to fill up the coolant level on a Kia Rio?

Now that you have find out where the coolant is in your Kia Rio , we will show you how to produce the level of it. Nothing could be less complicated, just adhere to the few steps down below:

  • Buy if you don’t have any coolant in the store, it’s just treated water with antifreeze added.
  • Verify on the side of the expansion tank of your Kia Rio the level of the expansion tank. Just observe if you are between the “min” and “max” mark, if you are more towards or down below the “min” mark you can continue to stick to these steps, in any other case the level of your liquid is sufficient
  • .

  • After waiting for the engine to cool down, you can open the coolant cap of your car.
  • Carefully add coolant to the expansion tank of your Kia Rio by examining repeatedly.
  • Try to reach the middle of the clue on the side of your vase, don’t go over the “max” mark.
  • If you’re on top of it, don’t start your engine unit, and with a syringe, remove the excess coolant.

If the engine unit of your Kia Rio warms up despite a level coolant, read this article, you will have the ability to find the causes of this issue.

If you want more guides on the Kia Rio, go to our Kia Rio category.