If you’re a bit of a handy person, you’re quite likely eager to look after the majority of the service to be done on your Ford Puma, but some are more complicated than others and necessitate the removal of body parts or parts to access the component you want to focus on. We would really like to help you in this task. That’s why in this article we are going to see how to remove the bumper from a Ford Puma. This action is not very complicated and you should have the ability to do it with few tools. To do so , first we will see how to remove the front bumper of your Ford Puma, then how to remove the rear bumper of this one.
How to remove the front bumper from a Ford Puma
So let’s commence our content page with the front bumper of your Ford Puma. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to stick to to be able to disassemble the bumper of your Ford Puma in good conditions:
- If you want to be more relaxed, we suggest you to put your Ford Puma on stands and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your car: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also named fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Ford Puma. According to your automobile features and the year of your model, you will also be able to find staples, to do this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is at the rear of your mudguard and that seals the front bumper of your Ford Puma on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go under your Ford Puma to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you quite likely forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Ford Puma, to put it back in place stick to the steps in the opposite direction.
How to remove the rear bumper from a Ford Puma
And to conclude, even if the operation is quite equivalent, we will take a look at the case of removing the rear bumper from your Ford Puma. For each step to avoid repeating ourselves we will just give you the broad outlines, refer to part 1 if you have any concerns or questions for more details.
- Start by executing the same first step, that is, lift your Ford Puma and take out your rear wheels to be able to have an ideal working area to remove the bumper of your Ford Puma serenely
- Remove the rear wheel arches of your Ford Puma to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it easier to remove the bumper from your Ford Puma.
- Take away the lower bindings below your Ford Puma.
- At the same time, make sure un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Ford Puma, stick to the same method as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Ford Puma whether it is the front one or the rear one the ways are just about the same and it is enough to be meticulous to make everything go well.
To discover more tips on the Ford Puma, take a look at the Ford Puma category.
