If you’re a bit of a handy person, you’re quite likely wanting to manage almost all of the work to be carried out on your Fiat Stilo, but some are more complex than others and necessitate the removal of body parts or components to access the component you want to operate on. We want to help you in this operation. That’s why today we are going to view how to remove the bumper from a Fiat Stilo. This action is not very complex and you should have the ability to do it with few equipment. To do so , first we will see how to remove the front bumper of your Fiat Stilo, then how to remove the rear bumper of this one.
How to remove the front bumper from a Fiat Stilo
So let’s begin our article with the front bumper of your Fiat Stilo. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to adhere to in order to disassemble the bumper of your Fiat Stilo in good conditions:
- If you want to be more comfortable, we advise you to put your Fiat Stilo on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your car: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take out the wheel arches: They’re also known as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Fiat Stilo. Depending on your motor vehicle features and the year of your model, you will also have the ability to find staples, to achieve this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that locks the front bumper of your Fiat Stilo on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go underneath your Fiat Stilo to unscrew the bolts that are on the chassis of the motor vehicle, you will find some in the middle of the bumper and on the sides.
- Make sure to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of working with a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Fiat Stilo, to reassemble it adhere to the steps in the opposite direction.
How to remove the rear bumper from a Fiat Stilo
And to conclude, even if the operation is quite equivalent, we will check out the case of removing the rear bumper from your Fiat Stilo. For each step to avoid repeating ourselves we will exclusively give you the broad highlights, read the part 1 if you have any doubts or questions for more information.
- Start with performing the same first step, that is, lift your Fiat Stilo and take out your rear wheels in order to have an ideal working space to remove the bumper of your Fiat Stilo serenely
- Remove the rear wheel arches of your Fiat Stilo to access the side bumper side brackets
- Open your trunk
- Take out the side brackets in your wheel arches to make it less complicated to remove the bumper from your Fiat Stilo.
- Take out the lower bindings underneath your Fiat Stilo.
- While doing so, make sure disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Fiat Stilo, adhere to the same process as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Fiat Stilo whether it is the front one or the rear one the methods are essentially the same and it is enough to be meticulous to make everything go well.
To discover more tips on the Fiat Stilo, take a look at the Fiat Stilo category.
