If you’re a bit of a handy person, you’re probably willing to manage almost all of the service to be achieved on your Citroen Nemo, but some are more complicated than others and necessitate the removal of body parts or elements to access the component you want to operate on. We want to help you in this operation. That’s why today we are going to discover how to remove the bumper from a Citroen Nemo. This action is not very complicated and you should have the ability to do it with few tools. To do so , first we will discover how to remove the front bumper of your Citroen Nemo, then how to remove the rear bumper of this one.
How to remove the front bumper from a Citroen Nemo
So let’s begin our content page with the front bumper of your Citroen Nemo. To remove it, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to adhere to to be able to disassemble the bumper of your Citroen Nemo in good conditions:
- If you want to be more comfortable, we advise you to put your Citroen Nemo on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your motor vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also described as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Citroen Nemo. Depending on your car features and the year of your model, you will also be able to find staples, to do this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that seals the front bumper of your Citroen Nemo on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go underneath your Citroen Nemo to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you probably forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Citroen Nemo, to put it back in place adhere to the steps in the opposite direction.
How to remove the rear bumper from a Citroen Nemo
And to conclude, whether or not the operation is quite identical, we will check out the case of removing the rear bumper from your Citroen Nemo. For each stage to avoid repeating ourselves we will exclusively give you the broad highlights, refer to part 1 if you have any concerns or questions for more details.
- Start by performing the same first stage, that is, lift your Citroen Nemo and remove your rear wheels to be able to have an optimal working area to remove the bumper of your Citroen Nemo serenely
- Remove the rear wheel arches of your Citroen Nemo to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it much easier to remove the bumper from your Citroen Nemo.
- Remove the lower bindings underneath your Citroen Nemo.
- At the same time, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Citroen Nemo, adhere to the same technique as for the front bumper
Here, you have learned through these two parts, how to remove the bumper from a Citroen Nemo whether it is the front one or the rear one the ways are essentially the same and it is enough to be careful to make everything go well.
To find more tips on the Citroen Nemo, take a look at the Citroen Nemo category.
