If you’re a bit of a do-it-yourselfer, you’re most likely wanting to manage the vast majority of the work to be carried out on your Chevrolet Trax, but some are more complicated than others and necessitate the removal of body parts or parts to access the component you want to focus on. We really want to help you in this operation. That’s why in this article we are going to see how to remove the bumper from a Chevrolet Trax. This procedure is not very complicated and you should have the ability to do it with few tools. To do so , first we will see how to remove the front bumper of your Chevrolet Trax, then how to remove the rear bumper of this one.
How to remove the front bumper from a Chevrolet Trax
So let’s start our content with the front bumper of your Chevrolet Trax. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to follow to be able to disassemble the bumper of your Chevrolet Trax in good conditions:
- If you want to be more relaxed, we recommend you to put your Chevrolet Trax on stands and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your car: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also called fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Chevrolet Trax. Depending on your car features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that fastens the front bumper of your Chevrolet Trax on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go beneath your Chevrolet Trax to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Make sure disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Chevrolet Trax, to reassemble it follow the steps in the opposite way.
How to remove the rear bumper from a Chevrolet Trax
And to conclude, regardless if the procedure is quite similar, we will check out the case of removing the rear bumper from your Chevrolet Trax. For each step to avoid repeating ourselves we will simply give you the broad highlights, refer to part 1 if you have any concerns or questions for more info.
- Start by executing the same first step, that is, lift your Chevrolet Trax and take out your rear wheels to be able to have an optimal working space to remove the bumper of your Chevrolet Trax without trouble
- Remove the rear wheel arches of your Chevrolet Trax to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it easier to remove the bumper from your Chevrolet Trax.
- Remove the lower bindings underneath your Chevrolet Trax.
- At the same time, be sure you disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Chevrolet Trax, follow the same method as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Chevrolet Trax whether it is the front one or the rear one the ways are just about the same and it is enough to be careful to make everything go well.
To discover more tips on the Chevrolet Trax, take a look at the Chevrolet Trax category.
