No matter if it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring your turn signal bulbs are all the time working is very important. In fact, bulbs are wearing parts that will predictably burn out with time and consequently need to be swapped out. You’re almost certainly in this article because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Chevrolet Trax, we’ve written and published this content to teach you do it on your own without having to go to your repair shop. In a first step, we will examine inspecting a burnt-out rear turn signal bulb on your Chevrolet Trax and in a second part, how to change the rear turn signal bulb on your Chevrolet Trax.

change-rear-turn-bulb-chevrolet-trax

How to be sure if the rear turn signal bulb on your Chevrolet Trax is burnt-out or needs to be replaced?

When you drive your vehicle you don’t all the time have the possibility to verify all the security features of your Chevrolet Trax. In fact, you are generally in a rush and are likely to get into your vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is due to this fact essential to take a little time to occasionally verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Chevrolet Trax, but you didn’t become aware of it. Here are the two simple solutions to verify if a rear turn signal on your car is out of order or if you need to change it fairly quickly:

  • When you stop, turn on the ignition on your Chevrolet Trax, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
  • By paying attention to the sound of your turn signals. In truth, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Chevrolet Trax, you will detect that the time between each “click” is much closer, this means that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first procedure shown above.

You may have another bulb to change, like the one of your low beam Chevrolet Trax or your position lights on Chevrolet Trax, don’t be reluctant to read our publications to help you to complete this substitution.

Replacing the rear turn signal bulb on my Chevrolet Trax

Now let’s go to the most instersting part of this content, how to change the rear turn signal bulb on Chevrolet Trax? You should be aware that this method is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Chevrolet Trax, see our dedicated content page. Nevertheless, here are the detailed steps to stick to in order to accomplish this work accurately:

  • To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take off the rear indicator bulb from your burnt-out turn signal that you have sooner recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
  • Change the rear turn signal bulb on your Chevrolet Trax. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning effectively

If you wish more guides on the Chevrolet Trax, go to our Chevrolet Trax category.