If you’re a bit of a do-it-yourselfer, you’re quite likely eager to look after the vast majority of the service to be completed on your Bmw Serie 4 F32, but some are more complicated than others and require the removal of body parts or parts to access the part you want to work on. We really want to help you in this task. That’s why in this article we are going to discover how to remove the bumper from a Bmw Serie 4 F32. This process is not very complicated and you should have the ability to do it with few tools. To do so , first we will discover how to remove the front bumper of your Bmw Serie 4 F32, then how to remove the rear bumper of this one.

remove-bumper-bmw-serie-4-f32

How to remove the front bumper from a Bmw Serie 4 F32

So let’s start our document with the front bumper of your Bmw Serie 4 F32. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to follow in order to disassemble the bumper of your Bmw Serie 4 F32 in good conditions:

  • If you want to be more relaxed, we encourage you to put your Bmw Serie 4 F32 on stands and to remove the front wheels to have a best access to the whole front bumper.
  • Open the bonnet of your motor vehicle: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
  • Take out the wheel arches: They’re also named fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Bmw Serie 4 F32. According to your automobile features and the year of your model, you will also have the ability to find staples, to accomplish this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
  • Then you will have to unscrew the screws that is at the rear of your mudguard and that seals the front bumper of your Bmw Serie 4 F32 on the sides.
  • Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
  • Now it’s time to go beneath your Bmw Serie 4 F32 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
  • Be sure you disconnect the connection of the plate lighting and the distance control sensor if you have it.
  • Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of using a carpet or other to prevent that it gets scratched by touching the ground.

That’s it, you’ve seen all the steps of how to remove the front bumper from your Bmw Serie 4 F32, to put it back in place follow the steps in the opposite direction.

How to remove the rear bumper from a Bmw Serie 4 F32

And now, regardless if the process is quite equivalent, we will look at the case of removing the rear bumper from your Bmw Serie 4 F32. For each step to avoid repeating ourselves we will only give you the broad outlines, read the part 1 if you have any doubts or questions for more info.

  • Start with carrying out the same first step, that is, lift your Bmw Serie 4 F32 and remove your rear wheels in order to have an ideal working area to remove the bumper of your Bmw Serie 4 F32 without trouble
  • Remove the rear wheel arches of your Bmw Serie 4 F32 to access the side bumper side brackets
  • Open your trunk
  • Take out the side brackets in your wheel arches to make it less difficult to remove the bumper from your Bmw Serie 4 F32.
  • Take off the lower bindings underneath your Bmw Serie 4 F32.
  • While doing so, make sure to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
  • Unscrew the top brackets from the top of the trunk.
  • Now all you have to do is remove the rear bumper from your Bmw Serie 4 F32, follow the same method as for the front bumper

Here, you have learned through these two parts, how to remove the bumper from a Bmw Serie 4 F32 whether it is the front one or the rear one the techniques are more or less the same and it is enough to be careful to make everything go well.

Whenever you have any additional questions about the Bmw Serie 4 F32, do not hesitate to consult our Bmw Serie 4 F32 category.