If you’re a bit of a handy person, you’re most certainly eager to manage the majority of the maintenance to be completed on your Audi Sq7, but some are more challenging than others and require the removal of body parts or parts to access the part you want to work on. We would like to help you in this process. That’s why today we are going to discover how to remove the bumper from a Audi Sq7. This action is not very challenging and you should be able to do it with few equipment. To accomplish this, first we will see how to remove the front bumper of your Audi Sq7, then how to remove the rear bumper of this one.
How to remove the front bumper from a Audi Sq7
So let’s start our document with the front bumper of your Audi Sq7. To take it off, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to stick to in order to disassemble the bumper of your Audi Sq7 in good conditions:
- If you want to be more relaxed, we suggest you to lift your Audi Sq7 and to remove the front wheels to have a best access to the whole front bumper.
- Open the bonnet of your vehicle: Would seem evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also referred to as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Audi Sq7. Depending on your automobile features and the year of your model, you will also be able to find staples, to do this, you will just have to use a staple extractor or to do it delicately with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is from behind your mudguard and that locks the front bumper of your Audi Sq7 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Audi Sq7 to unscrew the bolts that are on the chassis of the automobile, you will find some in the middle of the bumper and on the sides.
- Be sure you unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Audi Sq7, to reassemble it stick to the steps in the opposite direction.
How to remove the rear bumper from a Audi Sq7
And to finish, whether or not the process is quite identical, we will look at the case of removing the rear bumper from your Audi Sq7. For each step to avoid repeating ourselves we will simply give you the broad highlights, refer to part 1 if you have any concerns or questions for more info.
- Start with performing the same first step, that is, lift your Audi Sq7 and take out your rear wheels in order to have an optimal working space to remove the bumper of your Audi Sq7 serenely
- Remove the rear wheel arches of your Audi Sq7 to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it less difficult to remove the bumper from your Audi Sq7.
- Remove the lower bindings below your Audi Sq7.
- Simultaneously, be sure you disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Audi Sq7, stick to the same method as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Audi Sq7 whether it is the front one or the rear one the methods are essentially the same and it is enough to be careful to make everything go well.
If you wish more guides on the Audi Sq7, go to our Audi Sq7 category.
