We all have concerns with our motor vehicle sooner or later, whether it’s because you run out of gas, have a fuse trouble, or your car won’t start, all these breakdowns are likely to annoy us and we are in most cases powerless to fix them. That’s why all of us tries its best to help you in front of these problems, and today we will try to explain you how to lock your Peugeot 2008 with a dead battery? Indeed, if you have no more power, you will not be able to use the central locking of your car any longer. We will first show you how to roll up a window of a Peugeot 2008 with a dead battery, and secondly, how to lock the doors of your Peugeot 2008 without battery.

lock-dead-battery-peugeot-2008

How to roll up a window from an Peugeot 2008 with a dead battery?

So we will start our content page with the solution to enable you to close your Peugeot 2008 with no power and more precisely the window of this one. It doesn’t matter if your battery is empty, or you have taken off the battery, you will not have access to the electric controls of your Peugeot 2008, and therefore no longer have the chance to close the electric windows of your Peugeot 2008. Unfortunately you don’t have many possibilities to enable you to close them, in reality, closing the electric window of a Peugeot 2008 without battery is unachievable , with no power you don’t have the possibility to operate the systems of your window lifter, and whether or not you remove the trim of your door and try to reassemble the window manually you risk to destroy the motor of the window lifter of your Peugeot 2008. If, on the other hand, the window of your Peugeot 2008 is stuck while you have battery power, please relate to this guide to get a remedy to your trouble. Here are the only two solutions that we can suggest, even though they are quite logical:

  • Acquire a new battery for your Peugeot 2008 and change it , which will re-power all the electrical organs of the Peugeot 2008 and thus your window lifter systems. If you are planning to disconnect the battery from your Peugeot 2008, do not hesitate to browse our guideline to conduct this action.
  • Find a automobile that has battery power and connect your two batteries with jump start wire to recharge the battery and enable you to close the windows of your Peugeot 2008

.

How to close the doors on a Peugeot 2008 with a dead battery?

And now, we will certainly advance to the section that interests you the most, how to close Peugeot 2008 doors with no power, however , this time we will concentrate on the doors of this one. Indeed, your car may be out of battery in front of your house, you handled to open the doors and try to start it, but while waiting to find an alternative you want to ensure that nobody will have the ability to get inside. Unfortunately, it’s pretty much the same trouble as with the windows of your Peugeot 2008. Indeed, without power, it will be impossible to activate the door locking mechanisms. In some years you will have a push button on the window frame that you can press manually to close your Peugeot 2008 without power, but this is less and less the case. So we will give you as before the only two alternatives to allow you to close your car without energy:

  • Acquire a new battery and install it to close the doors of your Peugeot 2008, or find one in good condition. However, you will need access to the bonnet to do so
  • Connect your Peugeot 2008 to a running car to transfer energy and recharge your vehicle’s battery. This will at least give you enough power to close the doors of your car. If you have any worries about your battery’s ability to keep the charge. Make sure you close the doors of your car while it is still linked to the other automobile. Once you have achieved this, you can disconnect your battery and close your bonnet

.

If you wish more guides on the Peugeot 2008, go to our Peugeot 2008 category.