We all have problems with our motor vehicle at some point, whether it’s because you run out of gas, have a fuse trouble, or your car won’t start, all these breakdowns are likely to embarrass us and we are often incapable to manage them. That’s why we tries its best to help you in front of these concerns, and today we will make sure to show you how to lock your Jeep Wrangler with a dead battery? Indeed, if you have no more electricity, you will not be capable to use the central locking of your car any longer. We will first describe how to roll up a window of a Jeep Wrangler with a dead battery, and secondly, how to lock the doors of your Jeep Wrangler without battery.
How to roll up a window from an Jeep Wrangler with a dead battery?
So we will begin our content page with the technique to let you to close your Jeep Wrangler with no power and more precisely the window of this one. Whether your battery is out of power, or you have removed the battery, you will not have access to the electric controls of your Jeep Wrangler, and therefore no longer have the chance to close the electric windows of your Jeep Wrangler. Sadly you don’t have many choices to let you to close them, in reality, closing the electric window of a Jeep Wrangler without battery is impossible , with no power you don’t have the possibility to use the systems of your window lifter, and even if you remove the trim of your door and try to reassemble the window manually you risk to break the motor of the window lifter of your Jeep Wrangler. If it turns out, on the other hand, the window of your Jeep Wrangler is stuck while you have battery power, please refer to this guideline to get a solution to your trouble. Here are the only two answers that we can suggest, even though they are quite logical:
- Purchase a new battery for your Jeep Wrangler and replace it , which will re-power all the electrical parts of the Jeep Wrangler and thus your window lifter systems. If you are seeking to disconnect the battery from your Jeep Wrangler, do not be reluctant to read our guideline to accomplish this process.
- Find a motor vehicle that has battery power and connect your two batteries with jump start wire to recharge the battery and let you to close the windows of your Jeep Wrangler
.
How to close the doors on a Jeep Wrangler with a dead battery?
And now, we will surely advance to the section that interests you the more, how to close Jeep Wrangler doors with no power, nevertheless this time we will focus on the doors of this one. Indeed, your car may be out of battery in front of your house, you been able to open the doors and try to start it, but while waiting to find an answer you want to be certain that nobody will be able to get inside. Sadly, it’s pretty much the same trouble as with the windows of your Jeep Wrangler. Indeed, without power, it will be impossible to activate the door locking mechanisms. In some years you will have a push button on the window frame that you can press by hand to close your Jeep Wrangler without power, but this is less and less the case. So we will give you as before the only two solutions to allow you to close your car without energy:
- Purchase a new battery and fit it to close the doors of your Jeep Wrangler, or find one in good condition. However, you will need access to the bonnet to do so
- Connect your Jeep Wrangler to a running car to transfer energy and recharge your vehicle’s battery. This will at least give you enough power to close the doors of your car. If you have any doubts about your battery’s ability to keep the charge. Make sure to close the doors of your car while it is still linked to the other vehicle. Once you have done this, you can disconnect your battery and close your bonnet
.
If perhaps you have any further questions about the Jeep Wrangler, do not hesitate to consult our Jeep Wrangler category.
