Driving is a daily activity for many of us, our paths are not necessarily safe, and regardless whether it’s raining, windy or snowing, we quite often have no choice but to take our Jeep Wrangler. Not being able to act on traffic conditions, we try to have at minimum a safe vehicle! If you are not relaxed, if you have the impression that your Jeep Wrangler is pulling to the left, then you are on the good page. Our team made the decision to compose this content to help you discover the source of this problem and fairly quickly feel safe behind the wheel of your car. To accomplish this, we will initially look into the triggers of a Jeep Wrangler that pulls to the left without vibration and to finish, a car that pulls to the left with vibration.
Jeep Wrangler that pulls to the left without vibration
Jeep Wrangler pulling to the left because of the alignment
Let’s begin with the circumstance of your Jeep Wrangler which pulls to the left without vibration, one of the most common roots of a non-straight trajectory on a vehicle is the alignment , in reality, the parallelism is the adjustment of the vertical angle of the wheels, this adjustment is usually completed when you replace your tires. Nevertheless it is complicated or even impossible to know the state of your alignment, you can check out the sidewalls of your tires, if you identify abnormal wear on your Jeep Wrangler, it is most likely that the alignment is to blame. In this case, go to your service garage or tyre expert to resolve it.
Jeep Wrangler pulling to the left because of the tyres
Speaking of tires, parallelism isn’t the only motive for a car that pulls to the left. In fact, if you have a difference in pressure on your tires, it is obvious that your Jeep Wrangler is no longer a stable steering. Therefore remember to verify the pressure of all four tyres. Furthermore to the risk of an ıncident if you encounter your Jeep Wrangler pulling to the left because of the tyre pressure, you will accelerate the wear of the tyres. And therefore, you will have to replace them faster.
My Jeep Wrangler is pulling to the left and I encounter vibrations:
Jeep Wrangler pulling to the left because of the silent blocks
Now let’s look at the case of a Jeep Wrangler that pulls to the left but also triggers vibrations in the steering wheel. The first common reason of trajectory error plus vibration is that your silent blocks are dead. In fact, when they are too worn, they will no longer manage their job of shock absorber and binder between the different parts of your front drivetrain, which creates a lack of stability in the steering and the possibility if they are more worn on one side than the other that your Jeep Wrangler pulls to the left. Check their state and replace them if required. In the event that you would like more information on concerns with the silent blocks, please examine our detailed content.
My Jeep Wrangler pulls to the left due to the bearings
Another possibility that your Jeep Wrangler pulls to the left is that one of your bearings, usually the front one, is dead, you should, in addition to the trajectory defect, encounter a particular vibration or rolling noise. In fact, when bearings are damaged, they will no longer rotate as well and slow down the rotation of the wheel on which they are installed, which definitely creates a trajectory defect. Check their state and have them replaced if necessary.
My Jeep Wrangler pulls to the left due to the shock absorbers
Last but not least, your Jeep Wrangler that pulls to the left and produces vibrations due to the shock absorbers. Regardless whether it’s the damper cup, your tired springs, or a twisted cylinder, every defect in connection with the shock absorbers can bother the normal behaviour of the Jeep Wrangler. You should, even so, experience a noise when you drive over bumps or on speed bumps, for example. Have the state of your shock absorbers inspected and ask your auto technician for a replacement if necessary.
If you wish more guides on the Jeep Wrangler, go to our Jeep Wrangler category.
