Modern cars all come with an astounding amount of technology, but, by reason of your budget or the year of your Volvo V50, you may not be fortunate enough to have them all. Today we’re going to help you resolve this problem by detailing how to install parking sensor on my Volvo V50? In reality, this feature is very useful, especially if you live in the city and have to park on the regular basis in narrow parking spaces. To help you out, we’ll first examine how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Volvo V50, and finally, how much does a parking sensor cost?

install-parking-sensors-volvo-v50

How does parking sensors function on an Volvo V50?

So we begin with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting feature enables you to know the distance between the back of your Volvo V50 and an obstacle when you maneuver. It is consequently specifically legitimate for persons who have to maneuver regularly, whose field of vision is poor, or whose vehicle size is big.
In many cases installed as standard, the reverse sensors of a Volvo V50 is made up of a kit of sensors (minimum 4) that will be activated with reverse gear and will identify obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and estimate the distance between the obstacle and the radar. Generally you will have a sound warning in the cabin which will increase in level with the proximity of the obstacle and in some cases a visual marker in complement. The reversing radars of a Volvo V50 will enable you for parking, but as well for security and staying away from pedestrians.

How to install parking sensors on a Volvo V50?

We now move on to the part that you are almost certainly most focused on, installing reverse parking sensors on a Volvo V50. This part is for you if you don’t have a standard reserve sensor set up and you still desire to make use of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Volvo V50.

How to replace a malfunctioning backup sensors on a Volvo V50

First we’ll see how to replace a malfunctioning parking sensor on an Volvo V50. In cases where your Volvo V50 has suffered a rear shock and one of the sensors of your reversing radar has been damaged, it will have to be replaced to allow the system to function correctly. Good thing for you this procedure is extremely simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take out the damaged parking sensor from your Volvo V50, this step is very intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating correctly.
  • How to install an aftermarket parking sensor kit on an Volvo V50

    Now we advance to the part you’re probably most focused on, how to install a reverse sensor set up on a Volvo V50 that doesn’t have one? As we revealed earlier, you’re lucky because a good number of OEMs now offer automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will focus on these versions in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will surely have to remove the bumper of your Volvo V50 for the installation, do not hesitate to read our document on this subject to learn the procedure to follow. If you don’t feel like it, you can call a professional, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to adhere to the installation instructions, but we summarize here the main simple steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Volvo V50

      And finally, we will now present you the installation of a drill-free parking sensors system on a Volvo V50. There are two kind, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to remove. This sort of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Follow the installation instructions which is accessible with some electrical bases.
      • Find the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Volvo V50?

        Price of swapping a malfunctioning reversing parking sensor for an Volvo V50

        The replacement of a damaged reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is important to count about one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Volvo V50

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable kit.

        Price of a parking sensors kit without drilling for a Volvo V50

        .
        To finish, for the price of a reversing radar without drilling for your Volvo V50, no matter what version you select, you will have to pay between 30 and 60 euros.

        If you have any further questions about the Volvo V50, do not hesitate to consult our Volvo V50 category.