Modern cars all come with an astounding amount of options, nevertheless, by reason of your budget or the year of your Volkswagen Multivan, you may not be lucky enough to have them all. In this article we’re gonna help you correct this issue by explaining how to install parking sensor on my Volkswagen Multivan? Indeed, this feature is highly efficient, particularly if you live in the city and have to park on the regular basis in narrow parking spaces. To help you out, we’ll first check out how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Volkswagen Multivan, and finally, how much does a parking sensor cost?
How does parking sensors operate on an Volkswagen Multivan?
So we start with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature permits you to know the distance between the back of your Volkswagen Multivan and an obstacle when you move back. It is consequently especially logical for people who have to maneuver regularly, whose field of vision is awful, or whose car size is big.
Often fitted as standard, the reverse sensors of a Volkswagen Multivan is made up of a kit of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will enhance in strength with the closeness of the obstacle and sometimes a visual indicator in complement. The reversing radars of a Volkswagen Multivan will help you for parking, but as well for security and avoiding pedestrians.
How to install parking sensors on a Volkswagen Multivan?
We now proceed to the part that you are most certainly most focused on, fitting reverse parking sensors on a Volkswagen Multivan. This part is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Volkswagen Multivan.
How to change a malfunctioning backup sensors on a Volkswagen Multivan
First we’ll see how to change a malfunctioning parking sensor on an Volkswagen Multivan. In cases where your Volkswagen Multivan has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be swapped out to let the system to function effectively. Thankfully for you this procedure is really simple, you can even make it out yourself without any particular mechanical skill:
- Get a replacement unit radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Take off the broken parking sensor from your Volkswagen Multivan, this stage is extremely intuitive, it is simply clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s operating effectively.
- You will simply need to follow the installation recommendations, but we summarize here the main procedures.
- Take off the bumper if you don’t have access to the inside of it.
- Reflect on the ideal position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Position your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Give it a try all out.
- Adhere to the installation owners manual which is accessible with some electrical knowledges.
- Determine the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Test it all out.
How to install an aftermarket parking sensor kit on an Volkswagen Multivan
Now we advance to the part you’re quite likely most focused on, how to install a reverse sensor set up on a Volkswagen Multivan that doesn’t have one? As we said early on, you’re lucky because many of OEMs now sell automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this section. It is important to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will definitely have to remove the bumper of your Volkswagen Multivan for the set up, do not be reluctant to browse our content page on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a professional, the procedure should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Volkswagen Multivan
And finally, we will now present you the installation of a drill-free parking sensors system on a Volkswagen Multivan. There are two kind, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take out. This kind of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Volkswagen Multivan?
Price of changing a malfunctioning reversing parking sensor for an Volkswagen Multivan
The replacement of a broken reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is necessary to count about one hundred euros for the installation of the kit by a professional.
Price of an ultrasonic parking sensors with drilling for Volkswagen Multivan
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a top quality package.
Price of a parking sensors kit without drilling for a Volkswagen Multivan
.
At last, for the price of a reversing radar without drilling for your Volkswagen Multivan, what ever version you go for, you will have to pay among 30 and 60 euros.
To get more tips on the Volkswagen Multivan, take a look at the Volkswagen Multivan category.
