Recent cars all come with an incredible amount of technology, but, due to your budget or the year of your Volkswagen CC, you may not be fortunate enough to have them all. On this page we’re going to help you resolve this trouble by detailing how to install parking sensor on my Volkswagen CC? In fact, this option is very handy, especially if you live in the city and have to park your car often in narrow parking areas. To help you out, we’ll first view how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Volkswagen CC, and to conclude, how much does a parking sensor cost?

install-parking-sensors-volkswagen-cc

How does parking sensors work on an Volkswagen CC?

So we begin with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting option allows you to know the distance between the back of your Volkswagen CC and an obstacle when you move back. It is as a consequence specifically honest for persons who have to maneuver frequently, whose visibility is bad, or whose vehicle size is big.
Frequently installed as standard, the reverse sensors of a Volkswagen CC is made up of a kit of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and estimate the distance between the obstacle and the radar. In most cases you will have a sound indicator in the cabin which will rise in intensity with the proximity of the obstacle and in some models a visual sign in complement. The reversing radars of a Volkswagen CC will help you for parking, but also for safety and keeping away from pedestrians.

How to install parking sensors on a Volkswagen CC?

We now advance to the step that you are most likely most intrigued by, fitting reverse parking sensors on a Volkswagen CC. This part is for you if you don’t have a standard reserve sensor set up and you still want to make use of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy aftermarket parking sensors to install yourself on your Volkswagen CC.

How to change a defective backup sensors on a Volkswagen CC

First we’ll see how to change a defective parking sensor on an Volkswagen CC. If your Volkswagen CC has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be swapped out to let the system to function correctly. Fortunately for you this process is particularly simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the broken parking sensor from your Volkswagen CC, this part is extremely intuitive, it is just clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning correctly.
  • How to install an aftermarket parking sensor kit on an Volkswagen CC

    Now we move on to the part you’re quite likely most intrigued by, how to install a reverse sensor set up on a Volkswagen CC that doesn’t have one? As we mentioned earlier, you’re lucky because a good number of OEMs now provide aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will definitely have to remove the bumper of your Volkswagen CC for the set up, do not be reluctant to browse our article on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a professional, the process should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to adhere to the installation instructions, but we summarize here the main basic steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Volkswagen CC

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a Volkswagen CC. There are two kind, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not affect your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation instructions which is accessible with some electrical bases.
      • Identify the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Volkswagen CC?

        Price of replacing a defective reversing parking sensor for an Volkswagen CC

        The replacement of a broken reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is important to count about one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Volkswagen CC

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high class kit.

        Price of a parking sensors kit without drilling for a Volkswagen CC

        .
        At last, for the price of a reversing radar without drilling for your Volkswagen CC, what ever version you choose, you will have to spend among 30 and 60 euros.

        To discover more tips on the Volkswagen CC, take a look at the Volkswagen CC category.