Recent cars all come with an astounding amount of technology, nevertheless, due to your budget or the year of your Renault Megane 2, you may not be fortunate enough to have them all. Today we’re gonna help you solve this situation by explaining how to install parking sensor on my Renault Megane 2? In reality, this feature is highly efficient, especially if you live in the city and have to park habitually in narrow parking areas. To help you out, we’ll first look at how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Renault Megane 2, and finally, how much does a parking sensor cost?

install-parking-sensors-renault-megane-2

How does parking sensors function on an Renault Megane 2?

So we begin with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting feature will allow you to know the distance between the back of your Renault Megane 2 and an obstacle when you maneuver. It is consequently particularly legitimate for persons who have to maneuver regularly, whose visibility is bad, or whose vehicle size is large.
In many cases fitted as standard, the reverse sensors of a Renault Megane 2 include a set of sensors (minimum 4) that will be turned on with reverse gear and will sense obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will evaluate the duration of this journey and estimate the distance between the obstacle and the radar. Generally you will have a sound signal in the cabin which will rise in intensity with the closeness of the obstacle and in some models a visual marker in complement. The reversing radars of a Renault Megane 2 will enable you for parking, but as well for safety and keeping away from pedestrians.

How to install parking sensors on a Renault Megane 2?

We now go forward to the part that you are quite likely most focused on, fitting reverse parking sensors on a Renault Megane 2. This section is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy auto aftermarket parking sensors to install yourself on your Renault Megane 2.

How to change a defective backup sensors on a Renault Megane 2

First we’ll see how to change a defective parking sensor on an Renault Megane 2. In the event that your Renault Megane 2 has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be swapped out to let the system to function effectively. Good thing for you this procedure is extremely simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the malfunctioned parking sensor from your Renault Megane 2, this part is very intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning effectively.
  • How to install an aftermarket parking sensor kit on an Renault Megane 2

    Now we go forward to the section you’re almost certainly most focused on, how to install a reverse sensor set up on a Renault Megane 2 that doesn’t have one? As we mentioned early on, you’re lucky because a good number of OEMs now deal auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this section. It is imperative to have some notions in electricity, and some notions in do-it-yourself to contemplate the fitting up of the kit. You will surely have to remove the bumper of your Renault Megane 2 for the installation, do not hesitate to read our document on this subject matter to learn the procedure to follow. If you don’t feel like it, you can call a professional, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to follow the installation guidance, but we summarize here the main steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Renault Megane 2

      And finally, we will now present you the installation of a drill-free parking sensors system on a Renault Megane 2. There are two options, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Adhere to the installation guidebook which is accessible with some electrical bases.
      • Identify the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Renault Megane 2?

        Price of changing a defective reversing parking sensor for an Renault Megane 2

        The replacement of a broken reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is important to count about one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Renault Megane 2

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high class system.

        Price of a parking sensors kit without drilling for a Renault Megane 2

        .
        At last, for the price of a reversing radar without drilling for your Renault Megane 2, whatever type you go for, you will have to pay among 30 and 60 euros.

        If you want more guides on the Renault Megane 2, go to our Renault Megane 2 category.