Recent cars all come with an impressive amount of features, nevertheless, resulting from your budget or the year of your skoda octavia, you may not be fortunate enough to have them all. Today we’re going to help you correct this situation by detailing how to install parking sensor on my skoda octavia? Indeed, this option is extremely profitable, particularly if you live in the city and have to park your car frequently in narrow parking spaces. To help you out, we’ll first view how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a skoda octavia, and to conclude, how much does a parking sensor cost?

install-parking-sensors-skoda-octavia

How does parking sensors operate on an skoda octavia?

So we begin with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting option will allow you to know the distance between the back of your skoda octavia and an obstacle when you move back. It is therefore mainly logical for people who have to maneuver often, whose field of vision is poor, or whose car size is large.
Nearly always installed as standard, the reverse sensors of a skoda octavia consist of a kit of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will evaluate the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will rise in level with the proximity of the obstacle and in some models a visual marker in complement. The reversing radars of a skoda octavia will enable you for parking, but as well for security and avoiding pedestrians.

How to install parking sensors on a skoda octavia?

We now go forward to the part that you are likely most excited about, fitting reverse parking sensors on a skoda octavia. This section is for you if you don’t have a standard reserve sensor set up and you still desire to make use of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your skoda octavia.

How to replace a malfunctioning backup sensors on a skoda octavia

First we’ll see how to replace a malfunctioning parking sensor on an skoda octavia. In cases where your skoda octavia has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be replaced to allow the system to function properly. Luckily for you this operation is particularly simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacing radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the malfunctioned parking sensor from your skoda octavia, this part is fairly intuitive, it is just clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning properly.
  • How to install an aftermarket parking sensor kit on an skoda octavia

    Now we advance to the section you’re quite likely most excited about, how to install a reverse sensor set up on a skoda octavia that doesn’t have one? As we said earlier, you’re lucky because many of OEMs now offer automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this part. It is imperative to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will surely have to remove the bumper of your skoda octavia for the set up, do not be reluctant to browse our article on this subject to learn the method to follow. If you don’t feel like it, you can call a professional, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to adhere to the installation guidance, but we summarize here the main steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that includes your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Test it all out.
    • Install a parking sensor without drilling on a skoda octavia

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a skoda octavia. There are two kind, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation instructions which is accessible with some electrical knowledges.
      • Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a skoda octavia?

        Price of replacing a malfunctioning reversing parking sensor for an skoda octavia

        The replacement of a damaged reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for skoda octavia

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality kit.

        Price of a parking sensors kit without drilling for a skoda octavia

        .
        To conclude, for the price of a reversing radar without drilling for your skoda octavia, what ever version you go for, you will have to pay among 30 and 60 euros.

        If you need more tutorials on the skoda octavia, go to our skoda octavia category.