Recent cars all come with an astounding number of options, nevertheless, by reason of your budget or the year of your Porsche 911, you may not be sufficiently fortunate to have them all. Today we’re gonna help you correct this situation by showing how to install parking sensor on my Porsche 911? In reality, this option is extremely efficient, especially if you live in the city and have to park your car often in narrow parking places. To help you out, we’ll first examine how parking sensors work, then we’ll look at how to install a parking reverse sensor on a Porsche 911, and to finish, how much does a parking sensor cost?

install-parking-sensors-porsche-911

How does parking sensors function on an Porsche 911?

So we begin with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting option will allow you to know the distance between the back of your Porsche 911 and an obstacle when you maneuver. It is as a result especially logical for owners who have to maneuver on a regular basis, whose visibility is awful, or whose car size is big.
In many cases fitted as standard, the reverse sensors of a Porsche 911 is made up of a set of sensors (minimum 4) that will be activated with reverse gear and will sense obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. In most cases you will have a sound warning in the cabin which will rise in intensity with the closeness of the obstacle and in some models a visual marker in complement. The reversing radars of a Porsche 911 will enable you for parking, but as well for safety and avoiding pedestrians.

How to install parking sensors on a Porsche 911?

We now go forward to the part that you are most likely most intrigued by, fitting reverse parking sensors on a Porsche 911. This section is for you if you don’t have a standard reserve sensor set up and you still wish to make use of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Porsche 911.

How to change a malfunctioning backup sensors on a Porsche 911

First we’ll see how to change a malfunctioning parking sensor on an Porsche 911. If it turns out your Porsche 911 has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be replaced to allow the system to function properly. Thankfully for you this operation is extremely simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the malfunctioned parking sensor from your Porsche 911, this step is extremely intuitive, it is just clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning properly.
  • How to install an aftermarket parking sensor kit on an Porsche 911

    Now we go forward to the section you’re almost certainly most intrigued by, how to install a reverse sensor set up on a Porsche 911 that doesn’t have one? As we revealed early on, you’re lucky because many of OEMs now sell auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these versions in this part. It is imperative to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will definitely have to remove the bumper of your Porsche 911 for the set up, do not hesitate to browse our content page on this subject matter to discover the procedure to follow. If you don’t feel like it, you can call a workshop, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to follow the installation guidelines, but we summarize here the main procedures.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Give it a try all out.
    • Install a parking sensor without drilling on a Porsche 911

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Porsche 911. There are two sort, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation guidebook which is accessible with some electrical knowledges.
      • Locate the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Porsche 911?

        Price of changing a malfunctioning reversing parking sensor for an Porsche 911

        The replacement of a damaged reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is necessary to count about one hundred euros for the installation of the kit by a workshop.

        Price of an ultrasonic parking sensors with drilling for Porsche 911

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality package.

        Price of a parking sensors kit without drilling for a Porsche 911

        .
        To conclude, for the price of a reversing radar without drilling for your Porsche 911, what ever version you select, you will have to pay between 30 and 60 euros.

        To find more tips on the Porsche 911, take a look at the Porsche 911 category.