Recent cars all come with an impressive quantity of features, however, because of your budget or the year of your Peugeot Partner Tepee, you may not be sufficiently fortunate to have them all. In this article we’re gonna help you solve this concern by telling you how to install parking sensor on my Peugeot Partner Tepee? Indeed, this option is highly efficient, particularly if you live in the city and have to park your car often in narrow parking spots. To help you out, we’ll first view how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Peugeot Partner Tepee, and at last, how much does a parking sensor cost?
How does parking sensors function on an Peugeot Partner Tepee?
So we commence with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting option permits you to know the distance between the back of your Peugeot Partner Tepee and an obstacle when you move back. It is consequently especially legitimate for drivers who have to maneuver on a regular basis, whose field of vision is bad, or whose car size is big.
Often installed as standard, the reverse sensors of a Peugeot Partner Tepee consist of a kit of sensors (minimum 4) that will be turned on with reverse gear and will locate obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will analyze the duration of this journey and determine the distance between the obstacle and the radar. Generally you will have a sound signal in the cabin which will increase in strength with the proximity of the obstacle and in some cases a visual marker in complement. The reversing radars of a Peugeot Partner Tepee will help you for parking, but as well for security and avoiding pedestrians.
How to install parking sensors on a Peugeot Partner Tepee?
We now proceed to the part that you are most likely most interested in, fitting reverse parking sensors on a Peugeot Partner Tepee. This section is for you if you don’t have a standard reserve sensor set up and you still want to benefit of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy auto aftermarket parking sensors to install yourself on your Peugeot Partner Tepee.
How to replace a defective backup sensors on a Peugeot Partner Tepee
First we’ll see how to replace a defective parking sensor on an Peugeot Partner Tepee. If it turns out your Peugeot Partner Tepee has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be replaced to allow the system to function properly. Thankfully for you this procedure is very simple, you can even make it out yourself without any particular mechanical skill:
- Get a replacing radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Remove the broken parking sensor from your Peugeot Partner Tepee, this part is fairly intuitive, it is only clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s working properly.
- You will simply need to adhere to the installation instructions, but we summarize here the main procedures.
- Remove the bumper if you don’t have access to the inside of it.
- Reflect on the ideal location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it out all out.
- Follow the installation manual which is accessible with some electrical knowledges.
- Locate the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Try it all out.
How to install an aftermarket parking sensor kit on an Peugeot Partner Tepee
Now we proceed to the section you’re most likely most interested in, how to install a reverse sensor set up on a Peugeot Partner Tepee that doesn’t have one? As we mentioned earlier on, you’re lucky because a good number of OEMs now offer auto aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will definitely have to remove the bumper of your Peugeot Partner Tepee for the set up, do not hesitate to read our article content on this subject to discover the method to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Peugeot Partner Tepee
And at last, we will now present you the installation of a drill-free parking sensors system on a Peugeot Partner Tepee. There are two kind, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.
What’s the price of parking sensors for a Peugeot Partner Tepee?
Price of replacing a defective reversing parking sensor for an Peugeot Partner Tepee
The replacement of a broken reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is required to count approximately one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for Peugeot Partner Tepee
For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high class set up.
Price of a parking sensors kit without drilling for a Peugeot Partner Tepee
.
At last, for the price of a reversing radar without drilling for your Peugeot Partner Tepee, what ever version you go for, you will have to pay between 30 and 60 euros.
If perhaps you have any further questions about the Peugeot Partner Tepee, do not hesitate to consult our Peugeot Partner Tepee category.
