If you’re a bit of a handy person, you’re quite likely keen to take care of the vast majority of the maintenance to be carried out on your Peugeot Partner Tepee, but some are more complex than others and require the removal of body parts or elements to access the part you want to work on. We really want to help you in this process. That’s why today we are going to see how to remove the bumper from a Peugeot Partner Tepee. This action is not very complex and you should have the ability to do it with few tools. To do so , first we will discover how to remove the front bumper of your Peugeot Partner Tepee, then how to remove the rear bumper of this one.
How to remove the front bumper from a Peugeot Partner Tepee
So let’s start our article content with the front bumper of your Peugeot Partner Tepee. To remove it, you will just require a set of ratchet wrenches, some screwdrivers and torx bits. Here are the simple steps you will have to adhere to in order to disassemble the bumper of your Peugeot Partner Tepee in good conditions:
- If you want to be more relaxed, we recommend you to lift your Peugeot Partner Tepee and to remove the front wheels to have a good access to the whole front bumper.
- Open the bonnet of your car: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take away the wheel arches: They’re also known as fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Peugeot Partner Tepee. According to your car features and the year of your model, you will also be able to find staples, to do this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is behind your mudguard and that fastens the front bumper of your Peugeot Partner Tepee on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go underneath your Peugeot Partner Tepee to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Make sure unplug the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of employing a carpet or other to avoid that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Peugeot Partner Tepee, to reassemble it adhere to the steps in the opposite direction.
How to remove the rear bumper from a Peugeot Partner Tepee
And to conclude, even if the process is quite identical, we will check out the case of removing the rear bumper from your Peugeot Partner Tepee. For each stage to avoid repeating ourselves we will simply give you the broad highlights, refer to part 1 if you have any uncertainties or questions for more information.
- Start by undertaking the same first stage, that is, lift your Peugeot Partner Tepee and remove your rear wheels in order to have an ideal working area to remove the bumper of your Peugeot Partner Tepee serenely
- Remove the rear wheel arches of your Peugeot Partner Tepee to access the side bumper side brackets
- Open your trunk
- Take away the side brackets in your wheel arches to make it less difficult to remove the bumper from your Peugeot Partner Tepee.
- Take away the lower bindings underneath your Peugeot Partner Tepee.
- While doing so, be sure you disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Peugeot Partner Tepee, adhere to the same process as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Peugeot Partner Tepee whether it is the front one or the rear one the ways are practically the same and it is enough to be careful to make everything go well.
If you need more tutorials on the Peugeot Partner Tepee, go to our Peugeot Partner Tepee category.
