Modern cars all come with an impressive quantity of features, nevertheless, because of your budget or the year of your Land Rover Defender, you may not be sufficiently fortunate to have them all. On this page we’re gonna help you solve this issue by telling you how to install parking sensor on my Land Rover Defender? Indeed, this feature is very profitable, especially if you live in the city and have to park your car on the regular basis in narrow parking areas. To help you out, we’ll first look at how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Land Rover Defender, and at last, how much does a parking sensor cost?
How does parking sensors work on an Land Rover Defender?
So we start with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting feature enables you to know the distance between the back of your Land Rover Defender and an obstacle when you move back. It is therefore extremely logical for drivers who have to maneuver often, whose visibility is mediocre, or whose car size is big.
Often fitted as standard, the reverse sensors of a Land Rover Defender consist of a set of sensors (minimum 4) that will be turned on with reverse gear and will detect obstacles in the vicinity. The technology used is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will evaluate the duration of this journey and estimate the distance between the obstacle and the radar. In most cases you will have a sound signal in the cabin which will increase in level with the closeness of the obstacle and in some cases a visual sign in complement. The reversing radars of a Land Rover Defender will enable you for parking, but also for security and avoiding pedestrians.
How to install parking sensors on a Land Rover Defender?
We now advance to the part that you are probably most intrigued by, installing reverse parking sensors on a Land Rover Defender. This part is for you if you don’t have a standard reserve sensor set up and you still wish to take advantage of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Land Rover Defender.
How to replace a defective backup sensors on a Land Rover Defender
First we’ll see how to replace a defective parking sensor on an Land Rover Defender. If your Land Rover Defender has suffered a rear impact and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function effectively. Fortunately for you this process is really simple, you can even carry it out yourself without any particular mechanical skill:
- Get a replacement unit radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Remove the broken parking sensor from your Land Rover Defender, this part is very intuitive, it is only clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s functioning effectively.
- You will simply need to stick to the installation recommendations, but we summarize here the main procedures.
- Remove the bumper if you don’t have access to the inside of it.
- Think about the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it out all out.
- Follow the installation owners manual which is accessible with some electrical bases.
- Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Give it a try all out.
How to install an aftermarket parking sensor kit on an Land Rover Defender
Now we go forward to the part you’re almost certainly most intrigued by, how to install a reverse sensor set up on a Land Rover Defender that doesn’t have one? As we explained earlier on, you’re lucky because many of OEMs now provide auto aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will focus on these versions in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will definitely have to remove the bumper of your Land Rover Defender for the installation, do not be reluctant to read our content on this subject to discover the process to follow. If you don’t feel like it, you can call a specialist, the operation should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Land Rover Defender
And at last, we will now present you the installation of a drill-free parking sensors system on a Land Rover Defender. There are two options, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Land Rover Defender?
Price of replacing a defective reversing parking sensor for an Land Rover Defender
The replacement of a broken reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is necessary to count around one hundred euros for the installation of the kit by a specialist.
Price of an ultrasonic parking sensors with drilling for Land Rover Defender
For the models with holes there are many kits and different brands but you will have to count about 50 euros for a good quality set up.
Price of a parking sensors kit without drilling for a Land Rover Defender
.
To conclude, for the price of a reversing radar without drilling for your Land Rover Defender, whatever version you go for, you will have to pay between 30 and 60 euros.
To get more tips on the Land Rover Defender, take a look at the Land Rover Defender category.
