Modern cars all come with an impressive quantity of technology, nevertheless, due to your budget or the year of your Ford Mondeo, you may not be fortunate enough to have them all. On this page we’re gonna help you correct this issue by showing how to install parking sensor on my Ford Mondeo? In fact, this feature is very practical, especially if you live in the city and have to park your car often in narrow parking spaces. To help you out, we’ll first take a look at how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Ford Mondeo, and at last, how much does a parking sensor cost?

install-parking-sensors-ford-mondeo

How does parking sensors function on an Ford Mondeo?

So we start with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting feature allows you to know the distance between the back of your Ford Mondeo and an obstacle when you maneuver. It is therefore extremely good for persons who have to maneuver on a regular basis, whose visibility is awful, or whose car size is huge.
Often times installed as standard, the reverse sensors of a Ford Mondeo include a set of sensors (minimum 4) that will be activated with reverse gear and will detect obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. Generally you will have a sound indicator in the cabin which will increase in strength with the proximity of the obstacle and sometimes a visual marker in complement. The reversing radars of a Ford Mondeo will enable you for parking, but as well for safety and staying away from pedestrians.

How to install parking sensors on a Ford Mondeo?

We now advance to the section that you are quite likely most focused on, installing reverse parking sensors on a Ford Mondeo. This section is for you if you don’t have a standard reserve sensor set up and you still want to make use of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Ford Mondeo.

How to change a malfunctioning backup sensors on a Ford Mondeo

First we’ll see how to change a malfunctioning parking sensor on an Ford Mondeo. In the event that your Ford Mondeo has suffered a rear shock and one of the sensors of your reversing radar has been broken, it will have to be replaced to let the system to function correctly. Fortunately for you this process is very simple, you can even carry it out yourself without any particular mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the destroyed parking sensor from your Ford Mondeo, this stage is extremely intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working correctly.
  • How to install an aftermarket parking sensor kit on an Ford Mondeo

    Now we proceed to the section you’re probably most focused on, how to install a reverse sensor set up on a Ford Mondeo that doesn’t have one? As we said earlier, you’re lucky because many of OEMs now sell aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will look at these types in this part. It is imperative to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Ford Mondeo for the installation, do not hesitate to consult our article content on this subject to learn the method to follow. If you don’t feel like it, you can call a mechanic, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to stick to the installation guidance, but we summarize here the main steps.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Ford Mondeo

      And at last, we will now present you the installation of a drill-free parking sensors system on a Ford Mondeo. There are two sort, the ultrasounds more vulnerable because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Adhere to the installation guidebook which is accessible with some electrical bases.
      • Find the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Ford Mondeo?

        Price of changing a malfunctioning reversing parking sensor for an Ford Mondeo

        The replacement of a broken reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is important to count approximately one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Ford Mondeo

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality kit.

        Price of a parking sensors kit without drilling for a Ford Mondeo

        .
        Finally, for the price of a reversing radar without drilling for your Ford Mondeo, what ever version you select, you will have to spend among 30 and 60 euros.

        To find more tips on the Ford Mondeo, take a look at the Ford Mondeo category.