Modern cars all come with an impressive amount of options, nevertheless, by reason of your budget or the year of your Kia Picanto, you may not be sufficiently lucky to have them all. On this page we’re going to help you correct this problem by showing how to install parking sensor on my Kia Picanto? In reality, this feature is extremely efficient, especially if you live in the city and have to park your car regularly in narrow parking areas. To help you out, we’ll first take a look at how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Kia Picanto, and to conclude, how much does a parking sensor cost?

install-parking-sensors-kia-picanto

How does parking sensors function on an Kia Picanto?

So we commence with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature permits you to know the distance between the back of your Kia Picanto and an obstacle when you move back. It is as a consequence mainly honest for drivers who have to maneuver on a regular basis, whose field of vision is bad, or whose car size is large.
Nearly always installed as standard, the reverse sensors of a Kia Picanto incorporate a kit of sensors (minimum 4) that will be turned on with reverse gear and will spot obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. In general you will have a sound warning in the cabin which will increase in level with the proximity of the obstacle and in some models a visual marker in complement. The reversing radars of a Kia Picanto will help you for parking, but also for safety and staying away from pedestrians.

How to install parking sensors on a Kia Picanto?

We now go forward to the part that you are most likely most intrigued by, installing reverse parking sensors on a Kia Picanto. This part is for you if you don’t have a standard reserve sensor set up and you still wish to take advantage of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Kia Picanto.

How to change a damaged backup sensors on a Kia Picanto

First we’ll see how to change a damaged parking sensor on an Kia Picanto. If your Kia Picanto has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be swapped out to allow the system to function properly. Fortunately for you this procedure is really simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the broken parking sensor from your Kia Picanto, this stage is very intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s working properly.
  • How to install an aftermarket parking sensor kit on an Kia Picanto

    Now we go forward to the part you’re most likely most intrigued by, how to install a reverse sensor set up on a Kia Picanto that doesn’t have one? As we said early on, you’re lucky because a good number of OEMs now sell automotive aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these types in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will definitely have to remove the bumper of your Kia Picanto for the installation, do not hesitate to browse our content on this subject to learn the method to follow. If you don’t feel like it, you can call a professional, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to stick to the installation instructions, but we summarize here the main guidelines.
    • Take off the bumper if you don’t have access to the inside of it.
    • Think about the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Kia Picanto

      And to conclude, we will now present you the installation of a drill-free parking sensors system on a Kia Picanto. There are two kind, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Stick to the installation instructions which is accessible with some electrical bases.
      • Locate the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Kia Picanto?

        Price of changing a damaged reversing parking sensor for an Kia Picanto

        The replacement of a destroyed reversing radar will depend on the model, but the price will fluctuate between 10 and 30 euros per sensor. It is required to count around one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Kia Picanto

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a reliable set up.

        Price of a parking sensors kit without drilling for a Kia Picanto

        .
        To finish, for the price of a reversing radar without drilling for your Kia Picanto, no matter what type you choose, you will have to pay between 30 and 60 euros.

        In the event that you have any additional questions about the Kia Picanto, do not hesitate to consult our Kia Picanto category.