Modern cars all come with an astounding quantity of features, however, resulting from your budget or the year of your Toyota 4Runner, you may not be sufficiently lucky to have them all. Today we’re going to help you resolve this concern by detailing how to install parking sensor on my Toyota 4Runner? Indeed, this feature is extremely practical, particularly if you live in the city and have to park habitually in narrow parking places. To help you out, we’ll first look at how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Toyota 4Runner, and to finish, how much does a parking sensor cost?


How does parking sensors work on an Toyota 4Runner?

So we start with the functioning of a parking sensor. As we told you in the intro, this particularl interesting feature will allow you to know the distance between the back of your Toyota 4Runner and an obstacle when you maneuver. It is as a result especially good for persons who have to maneuver regularly, whose visibility is mediocre, or whose vehicle size is huge.
Nearly always installed as standard, the reverse sensors of a Toyota 4Runner include a kit of sensors (minimum 4) that will be activated with reverse gear and will detect obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be delivered back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. In most cases you will have a sound signal in the cabin which will increase in strength with the closeness of the obstacle and in some models a visual marker in complement. The reversing radars of a Toyota 4Runner will enable you for parking, but as well for safety and staying away from pedestrians.

How to install parking sensors on a Toyota 4Runner?

We now go forward to the part that you are most certainly most intrigued by, fitting reverse parking sensors on a Toyota 4Runner. This section is for you if you don’t have a standard reserve sensor set up and you still want to take advantage of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy auto aftermarket parking sensors to install yourself on your Toyota 4Runner.

How to change a malfunctioning backup sensors on a Toyota 4Runner

First we’ll see how to change a malfunctioning parking sensor on an Toyota 4Runner. If your Toyota 4Runner has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function properly. Fortunately for you this procedure is extremely simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Take out the malfunctioned parking sensor from your Toyota 4Runner, this step is fairly intuitive, it is just clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning properly.
  • How to install an aftermarket parking sensor kit on an Toyota 4Runner

    Now we proceed to the section you’re quite likely most intrigued by, how to install a reverse sensor set up on a Toyota 4Runner that doesn’t have one? As we revealed early on, you’re lucky because many of OEMs now offer auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will focus on these models in this section. It is important to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Toyota 4Runner for the installation, do not hesitate to consult our content on this subject to learn the procedure to follow. If you don’t feel like it, you can call a mechanic, the task should take him between 1 and 2 hours, and for you around 3 hours.

    • You will simply need to adhere to the installation guidelines, but we summarize here the main basic steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Think about the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Toyota 4Runner

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Toyota 4Runner. There are two kind, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not harm your bumper and will thus be easy to take off. This kind of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Follow the installation owners manual which is accessible with some electrical bases.
      • Identify the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Toyota 4Runner?

        Price of replacing a malfunctioning reversing parking sensor for an Toyota 4Runner

        The replacement of a damaged reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is important to count about one hundred euros for the installation of the kit by a mechanic.

        Price of an ultrasonic parking sensors with drilling for Toyota 4Runner

        For the models with holes there are many kits and different brands but you will have to count around 50 euros for a high quality package.

        Price of a parking sensors kit without drilling for a Toyota 4Runner

        To finish, for the price of a reversing radar without drilling for your Toyota 4Runner, no matter what type you select, you will have to spend between 30 and 60 euros.

        To discover more tips on the Toyota 4Runner, take a look at the Toyota 4Runner category.