Recent cars all come with an astounding number of options, however, resulting from your budget or the year of your Jaguar XE, you may not be lucky enough to have them all. Today we’re going to help you correct this concern by detailing how to install parking sensor on my Jaguar XE? In reality, this feature is very efficient, especially if you live in the city and have to park your car on the regular basis in narrow parking areas. To help you out, we’ll first take a look at how parking sensors function, then we’ll take a look at how to install a parking reverse sensor on a Jaguar XE, and to finish, how much does a parking sensor cost?

install-parking-sensors-jaguar-xe

How does parking sensors operate on an Jaguar XE?

So we begin with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature will allow you to know the distance between the back of your Jaguar XE and an obstacle when you maneuver. It is consequently extremely legitimate for persons who have to maneuver on a regular basis, whose visibility is poor, or whose vehicle size is big.
Often fitted as standard, the reverse sensors of a Jaguar XE integrate a kit of sensors (minimum 4) that will be turned on with reverse gear and will detect obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. In general you will have a sound signal in the cabin which will rise in level with the closeness of the obstacle and in some models a visual marker in complement. The reversing radars of a Jaguar XE will help you for parking, but also for safety and avoiding pedestrians.

How to install parking sensors on a Jaguar XE?

We now proceed to the step that you are quite likely most interested in, installing reverse parking sensors on a Jaguar XE. This section is for you if you don’t have a standard reserve sensor set up and you still desire to take advantage of this technology, or if you have to replace a broken one. You are lucky, it is possible to buy automotive aftermarket parking sensors to install yourself on your Jaguar XE.

How to change a faulty backup sensors on a Jaguar XE

First we’ll see how to change a faulty parking sensor on an Jaguar XE. If it turns out your Jaguar XE has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be replaced to allow the system to function correctly. Luckily for you this process is very simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacement unit radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Remove the damaged parking sensor from your Jaguar XE, this stage is fairly intuitive, it is simply clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning correctly.
  • How to install an aftermarket parking sensor kit on an Jaguar XE

    Now we move on to the section you’re most likely most interested in, how to install a reverse sensor set up on a Jaguar XE that doesn’t have one? As we explained earlier on, you’re lucky because many of OEMs now offer automotive aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will look at these versions in this section. It is required to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will surely have to remove the bumper of your Jaguar XE for the set up, do not be reluctant to browse our document on this subject to learn the process to follow. If you don’t feel like it, you can call a professional, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to adhere to the installation recommendations, but we summarize here the main procedures.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the best position of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Give it a try all out.
    • Install a parking sensor without drilling on a Jaguar XE

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Jaguar XE. There are two sort, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take off. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation manual which is accessible with some electrical knowledges.
      • Determine the best sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Test it all out.
      • What’s the price of parking sensors for a Jaguar XE?

        Price of swapping a faulty reversing parking sensor for an Jaguar XE

        The replacement of a broken reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is necessary to count about one hundred euros for the installation of the kit by a professional.

        Price of an ultrasonic parking sensors with drilling for Jaguar XE

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality package.

        Price of a parking sensors kit without drilling for a Jaguar XE

        .
        To conclude, for the price of a reversing radar without drilling for your Jaguar XE, whatever type you go for, you will have to pay between 30 and 60 euros.

        Whenever you have any further questions about the Jaguar XE, do not hesitate to consult our Jaguar XE category.