Modern cars all come with an incredible amount of features, but, by reason of your budget or the year of your Fiat Scudo, you may not be fortunate enough to have them all. Today we’re gonna help you correct this trouble by detailing how to install parking sensor on my Fiat Scudo? In fact, this option is extremely practical, particularly if you live in the city and have to park regularly in narrow parking spots. To help you out, we’ll first take a look at how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Fiat Scudo, and to finish, how much does a parking sensor cost?

install-parking-sensors-fiat-scudo

How does parking sensors work on an Fiat Scudo?

So we commence with the functioning of a parking sensor. As we explained to you in the introduction, this particularl interesting option enables you to know the distance between the back of your Fiat Scudo and an obstacle when you move back. It is as a consequence mainly logical for persons who have to maneuver on a regular basis, whose visibility is bad, or whose car size is huge.
Often times installed as standard, the reverse sensors of a Fiat Scudo integrate a set of sensors (minimum 4) that will be turned on with reverse gear and will detect obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will examine the duration of this journey and determine the distance between the obstacle and the radar. Generally you will have a sound warning in the cabin which will enhance in intensity with the proximity of the obstacle and in some models a visual marker in complement. The reversing radars of a Fiat Scudo will enable you for parking, but also for security and staying away from pedestrians.

How to install parking sensors on a Fiat Scudo?

We now proceed to the step that you are most certainly most interested in, installing reverse parking sensors on a Fiat Scudo. This part is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Fiat Scudo.

How to change a defective backup sensors on a Fiat Scudo

First we’ll see how to change a defective parking sensor on an Fiat Scudo. In the event that your Fiat Scudo has suffered a rear collision and one of the sensors of your reversing radar has been destroyed, it will have to be replaced to allow the system to function effectively. Luckily for you this procedure is extremely simple, you can even carry it out yourself without any specified mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take off the destroyed parking sensor from your Fiat Scudo, this step is very intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating effectively.
  • How to install an aftermarket parking sensor kit on an Fiat Scudo

    Now we advance to the part you’re most certainly most interested in, how to install a reverse sensor set up on a Fiat Scudo that doesn’t have one? As we revealed earlier on, you’re lucky because a good number of OEMs now offer aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this part. It is required to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will definitely have to remove the bumper of your Fiat Scudo for the set up, do not hesitate to browse our article on this subject matter to learn the method to follow. If you don’t feel like it, you can call a specialist, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will only need to adhere to the installation instructions, but we summarize here the main steps.
    • Take off the bumper if you don’t have access to the inside of it.
    • Reflect on the ideal location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it all out.
    • Install a parking sensor without drilling on a Fiat Scudo

      And to finish, we will now present you the installation of a drill-free parking sensors system on a Fiat Scudo. There are two kind, the ultrasounds more weak because exposed to the shocks, and the electromagnetics which stick behind the bumper and which are thus protected, it does not damage your bumper and will thus be easy to remove. This sort of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Follow the installation guidebook which is accessible with some electrical bases.
      • Locate the ideal sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Fiat Scudo?

        Price of changing a defective reversing parking sensor for an Fiat Scudo

        The replacement of a destroyed reversing radar will rely upon the model, but the price will vary between 10 and 30 euros per sensor. It is necessary to count about one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Fiat Scudo

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality system.

        Price of a parking sensors kit without drilling for a Fiat Scudo

        .
        To conclude, for the price of a reversing radar without drilling for your Fiat Scudo, whatever type you choose, you will have to spend among 30 and 60 euros.

        If perhaps you have any further questions about the Fiat Scudo, do not hesitate to consult our Fiat Scudo category.