Modern cars all come with an impressive number of technology, however, because of your budget or the year of your Audi Q8, you may not be fortunate enough to have them all. On this page we’re going to help you resolve this issue by telling you how to install parking sensor on my Audi Q8? Indeed, this option is highly handy, especially if you live in the city and have to park your car habitually in narrow parking places. To help you out, we’ll first take a look at how parking sensors function, then we’ll look at how to install a parking reverse sensor on a Audi Q8, and finally, how much does a parking sensor cost?


How does parking sensors operate on an Audi Q8?

So we start with the functioning of a parking sensor. As we explained to you in the intro, this particularl interesting option allows you to know the distance between the back of your Audi Q8 and an obstacle when you move back. It is therefore mainly good for people who have to maneuver regularly, whose visibility is bad, or whose car size is big.
In many cases installed as standard, the reverse sensors of a Audi Q8 consist of a kit of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will analyze the duration of this journey and estimate the distance between the obstacle and the radar. Generally you will have a sound warning in the cabin which will increase in intensity with the proximity of the obstacle and in some cases a visual indicator in complement. The reversing radars of a Audi Q8 will enable you for parking, but as well for safety and keeping away from pedestrians.

How to install parking sensors on a Audi Q8?

We now proceed to the section that you are almost certainly most intrigued by, installing reverse parking sensors on a Audi Q8. This part is for you if you don’t have a standard reserve sensor set up and you still wish to benefit of this technology, or if you have to replace a broken one. You are fortunate people, it is possible to buy automotive aftermarket parking sensors to install yourself on your Audi Q8.

How to change a defective backup sensors on a Audi Q8

First we’ll see how to change a defective parking sensor on an Audi Q8. In the event that your Audi Q8 has suffered a rear shock and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to allow the system to function correctly. Fortunately for you this process is very simple, you can even make it out yourself without any particular mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Unplug the old backup sensor from the back of the bumper.
  • Take out the broken parking sensor from your Audi Q8, this stage is fairly intuitive, it is simply clipped on.
  • Fit the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s operating correctly.
  • How to install an aftermarket parking sensor kit on an Audi Q8

    Now we go forward to the part you’re probably most intrigued by, how to install a reverse sensor set up on a Audi Q8 that doesn’t have one? As we mentioned earlier, you’re lucky because many of OEMs now provide automotive aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will focus on these models in this section. It is important to have some notions in electricity, and some notions in do-it-yourself to consider the fitting up of the kit. You will surely have to remove the bumper of your Audi Q8 for the set up, do not be reluctant to read our article content on this subject matter to learn the procedure to follow. If you don’t feel like it, you can call a specialist, the procedure should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to adhere to the installation instructions, but we summarize here the main simple steps.
    • Take out the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Place your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Audi Q8

      And finally, we will now present you the installation of a drill-free parking sensors system on a Audi Q8. There are two options, the ultrasounds more fragile because exposed to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The set up of these types of sensors will be similar.

      • Adhere to the installation owners manual which is accessible with some electrical bases.
      • Find the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Try it all out.
      • What’s the price of parking sensors for a Audi Q8?

        Price of swapping a defective reversing parking sensor for an Audi Q8

        The replacement of a damaged reversing radar will rely upon the model, but the price will fluctuate between 10 and 30 euros per sensor. It is essential to count approximately one hundred euros for the installation of the kit by a specialist.

        Price of an ultrasonic parking sensors with drilling for Audi Q8

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a top quality system.

        Price of a parking sensors kit without drilling for a Audi Q8

        Finally, for the price of a reversing radar without drilling for your Audi Q8, what ever type you select, you will have to pay between 30 and 60 euros.

        If you wish more guides on the Audi Q8, go to our Audi Q8 category.