You’re uninterested in listening to cassettes and only being able to listent to the radio, while your phone is loaded with your favourite music file but you don’t have a jack or usb port on your car radio, so you can’t enjoy your car travels to the fullest… That’s precisely why we’ve posted this content page to help you, because right now you’re going to find out how to install a car radio on your Volkswagen Crafter. To achieve this, first of all we will discover how to remove the old car radio, then how to install a car radio on Volkswagen Crafter and finally, how to connect it.
How to install car radio on Volkswagen Crafter: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Volkswagen Crafter, there is one imperative task, take away the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start dismantling, always remember to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two methods based on the stereo that equips your Volkswagen Crafter:
- Original car radio:
In cases like this, you’ll have to be persistent, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this operation will not be enough to remove the old car radio from your Volkswagen Crafter. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To get this done, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this circumstance the operation is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve concluded dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Volkswagen Crafter: Fitting and connecting the car radio
Let’s go to the essential section for you, how to install a car stereo on your Volkswagen Crafter. Ahead of time, spend some time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various steps involved in installing an aftermarket car radio. Firstly, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Volkswagen Crafter, once placed, remember to press the locking tabs on each side of the frame. Once this step has been achieved, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Volkswagen Crafter, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Volkswagen Crafter, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To find more tips on the Volkswagen Crafter, take a look at the Volkswagen Crafter category.
