You’re uninterested in listening to cassettes and only having the ability to listent to the radio, while your phone is filled with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve created this article to help you, because right now you’re going to find out how to install a car radio on your Toyota Scion FR S. To accomplish this, first of all we will find out how to remove the old car radio, then how to install a car radio on Toyota Scion FR S and finally, how to connect it.
How to install car radio on Toyota Scion FR S: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Toyota Scion FR S, there is one fundamental task, take off the audio set you currently have on your car. There are two scenarios, either you have an original headunit, or you have an universal set. Before you start dismantling, always don’t forget to remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two ways dependent on the stereo that equips your Toyota Scion FR S:
- Original car radio:
In cases like this, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this procedure will not be enough to remove the old car radio from your Toyota Scion FR S. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this circumstance the process is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Toyota Scion FR S: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Toyota Scion FR S. Ahead of time, take the time to check the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Toyota Scion FR S, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been completed, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Toyota Scion FR S, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just discovered how to install a car radio on Toyota Scion FR S, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To get more tips on the Toyota Scion FR S, take a look at the Toyota Scion FR S category.
