You’re uninterested in listening to cassettes and only having the ability to listent to the radio, while your phone is loaded with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve posted this article to help you, because in this article you’re going to learn about how to install a car radio on your Peugeot 806. To accomplish this, first we will see how to remove the old car radio, then how to install a car radio on Peugeot 806 and to finish, how to connect it.
How to install car radio on Peugeot 806: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Peugeot 806, there is one imperative step, take away the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two options dependent on the stereo that equips your Peugeot 806:
- Original car radio:
In this case, you’ll have to be persistent, in most cases, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Peugeot 806. In truth, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this scenario the technique is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Peugeot 806: Fitting and connecting the car radio
Let’s go to the most important step for you, how to install a car stereo on your Peugeot 806. Before you start, spend some time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various actions involved in installing an aftermarket car radio. To begin with, put in place the metal frame provided with your new car radio, this frame has the task of holding your car radio in place on your Peugeot 806, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Peugeot 806, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adjust it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Peugeot 806, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t think twice to visit our page dedicated to it.
To find more tips on the Peugeot 806, take a look at the Peugeot 806 category.
