You’re bored with listening to cassettes and only being able to enjoy the radio, while your smart phone is loaded with your favourite music but you don’t have a jack or usb port on your car radio, so you can’t appreciate your car trips to the fullest… That’s precisely why we’ve posted this content to help you, because right now you’re going to learn about how to install a car radio on your Peugeot Partner 2. To achieve this, first of all we will see how to remove the old car radio, then how to install a car radio on Peugeot Partner 2 and finally, how to connect it.
How to install car radio on Peugeot Partner 2: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Peugeot Partner 2, there is one essential step, take away the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always make sure to remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is done, here are the two ways determined by the stereo that equips your Peugeot Partner 2:
- Original car radio:
In cases like this, you’ll have to be patient, generally speaking, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Peugeot Partner 2. Indeed, you will need to remove certain auto parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, make sure to disconnect all the connections. - Aftermarket radio :
In this scenario the procedure is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, make sure to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Peugeot Partner 2: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Peugeot Partner 2. Before you start, take the time to verify the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific instructions.
Here are the various actions required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Peugeot Partner 2, once installed, make sure to press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Peugeot Partner 2, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Peugeot Partner 2, make sure to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
If perhaps you have any additional questions about the Peugeot Partner 2, do not hesitate to consult our Peugeot Partner 2 category.
