You’re uninterested in listening to cassettes and only being able to enjoy the radio, while your smart phone is filled with your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t enjoy your car trips to the fullest… That’s specifically why we’ve written and published this content page to help you, because in this article you’re going to learn about how to install a car radio on your Nissan Maxima. To get this done, first we will discover how to remove the old car radio, then how to install a car radio on Nissan Maxima and finally, how to connect it.
How to install car radio on Nissan Maxima: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Nissan Maxima, there is one important task, take away the audio set you already have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative wire from the battery to avoid any risk of short-circuit or electrocution. Once this is completed, here are the two options according to the stereo that equips your Nissan Maxima:
- Original car radio:
In this case, you’ll have to be patient, in general, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Nissan Maxima. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the technique is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is completed, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Nissan Maxima: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Nissan Maxima. Ahead of time, take some time to verify the compatibility of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines required in installing an aftermarket car radio. Firstly, put in place the metal frame supplied with your new car radio, this frame has the job of holding your car radio in place on your Nissan Maxima, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been done, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Nissan Maxima, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. At last, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Nissan Maxima, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other trouble, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If perhaps you have any additional questions about the Nissan Maxima, do not hesitate to consult our Nissan Maxima category.
